Yellow Cayman GT4 BBi Roll Bar & Schroth Racing Harness Install at Pacific Porsche
#1
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Jul 2015
Posts: 4,290
Likes: 553
From: Huntington Beach, California
Yellow Cayman GT4 BBi Roll Bar & Schroth Racing Harness Install at Pacific Porsche
Attachment 1344394
Racing Yellow Porsche 981 Cayman GT4 BBi Street Cup Roll Bar
& Schroth Racing Harness Installation at Pacific Porsche Dealership
We would like to present this beautiful Racing Yellow 981 GT4 project that received a few safety upgrades at Pacific Porsche dealership in the South Bay region of Los Angeles. To make her suitable for weekend track duties, Pacific's service department installed our BBi Street Cup Roll Bar & Schroth Racing harnesses for the driver and passenger to be properly secured and provide additional protection. We are proud to be working with many dealerships such as Pacific Porsches across North America as our premiere installation centers for BBi Autosport performance and safety products. Considered to be the most trusted destination for service and support, our relationship with many Porsche dealerships are invaluable as they are a very important part of our long term growth strategy. Here are some detailed pictures of the build process and upgraded parts that we would like to share below.
BBi 981 GT4 StreetCup Roll Bar
Our bar features 4130 chrome moly steel tubing for excellent strength to weight ratio and addresses issues such as harness angle, seat travel, and engine compartment access. With our sensible design approach, the bar mounts to frame structure in the cabin and rear strut towers to provide the strongest mounting points and maximum protection. For superior strength and rigidity, high strength 4130 chrome moly steel tubing was used throughout and all joints are meticulously TIG welded by hand. Bolt-in installation is accomplished by using Inner Diameter Tube Clamps that are CNC turned and milled for a precise fit. These unique joints allow us to eliminate the more traditional slip fit tubes with an unsightly through-bolt and nut. Consistent with our design philosophy, the final result is a bar that is clean & functional.
Key Features
About Pacific Porsche
Pacific Porsche has been serving the South Bay since 1999 and is proud to be one of only two Premier Dealers in Metro Los Angeles and one of only 25 in the entire US. It's no secret that the Pacific Porsche team loves racing and also very supportive of the local enthusiast community. It may be less well-known that they have started racing the new Porsche Cayman GT4 Clubsport in the Pirelli GT3 Cup Trophy USA Race Series. Dealership Principal Mike Sullivan and General Sales Manager Carl Tofflemire are donning their race suits to go wheel-to-wheel around the country.
Contact Information
Pacific Porsche
2900 Pacific Coast Highway
Torrance, CA 90505
International shipping is available and wholesale inquiries are welcomed. BBi Autosport products are also available worldwide through our growing dealer network in North America, Latin America, Europe, Middle East, Africa, Asia and Pacific. BBi Autosport is always actively working to expand our dealer network worldwide to grow the distribution of our products and better serve our growing client base. For all questions and inquiries, please email Jerry@BBiAutosport.com or Sales@BBiAutosport.com
- Jerry@BBiAutosport.com
Racing Yellow Porsche 981 Cayman GT4 BBi Street Cup Roll Bar
& Schroth Racing Harness Installation at Pacific Porsche Dealership
We would like to present this beautiful Racing Yellow 981 GT4 project that received a few safety upgrades at Pacific Porsche dealership in the South Bay region of Los Angeles. To make her suitable for weekend track duties, Pacific's service department installed our BBi Street Cup Roll Bar & Schroth Racing harnesses for the driver and passenger to be properly secured and provide additional protection. We are proud to be working with many dealerships such as Pacific Porsches across North America as our premiere installation centers for BBi Autosport performance and safety products. Considered to be the most trusted destination for service and support, our relationship with many Porsche dealerships are invaluable as they are a very important part of our long term growth strategy. Here are some detailed pictures of the build process and upgraded parts that we would like to share below.
BBi 981 GT4 StreetCup Roll Bar
Our bar features 4130 chrome moly steel tubing for excellent strength to weight ratio and addresses issues such as harness angle, seat travel, and engine compartment access. With our sensible design approach, the bar mounts to frame structure in the cabin and rear strut towers to provide the strongest mounting points and maximum protection. For superior strength and rigidity, high strength 4130 chrome moly steel tubing was used throughout and all joints are meticulously TIG welded by hand. Bolt-in installation is accomplished by using Inner Diameter Tube Clamps that are CNC turned and milled for a precise fit. These unique joints allow us to eliminate the more traditional slip fit tubes with an unsightly through-bolt and nut. Consistent with our design philosophy, the final result is a bar that is clean & functional.
Key Features
- Chrome moly steel tubing utilized for excellent strength to weight ratio
- Modular construction to allow access to engine for servicing without removing entire rollbar
- Shoulder harness mounting crossbar positioned at appropriate height as per Schroth's instructions
- TIG welded and utilizes "X" braces on rear section for superior strength and rigidity
- Mounts to frame structure and rear strut tower to provide strongest mounting points and maximum protection
- Utilizes laser cut mounting plates & inner diameter tube clamps that are CNC turned and milled for a precise fit
- Designed to work with stock or any aftermarket seats on the market
- Minimal affect on seat travel to accommodate taller drivers
- Can be used with stock seat-belts or 6 point harnesses for track use
- Designed to work with wrap-around style harnesses while optional eyelet bolt provisions are available for clip-in harnesses
- OEM fit & finish. The main hoop contours entire arch of the roof with an even curve
- Finished in satin black powder coat. Other colors available
- Bolt-in installation requires no drilling and minimal carpet trimming[/SIZE]
About Pacific Porsche
Pacific Porsche has been serving the South Bay since 1999 and is proud to be one of only two Premier Dealers in Metro Los Angeles and one of only 25 in the entire US. It's no secret that the Pacific Porsche team loves racing and also very supportive of the local enthusiast community. It may be less well-known that they have started racing the new Porsche Cayman GT4 Clubsport in the Pirelli GT3 Cup Trophy USA Race Series. Dealership Principal Mike Sullivan and General Sales Manager Carl Tofflemire are donning their race suits to go wheel-to-wheel around the country.
Contact Information
Pacific Porsche
2900 Pacific Coast Highway
Torrance, CA 90505
International shipping is available and wholesale inquiries are welcomed. BBi Autosport products are also available worldwide through our growing dealer network in North America, Latin America, Europe, Middle East, Africa, Asia and Pacific. BBi Autosport is always actively working to expand our dealer network worldwide to grow the distribution of our products and better serve our growing client base. For all questions and inquiries, please email Jerry@BBiAutosport.com or Sales@BBiAutosport.com
- Jerry@BBiAutosport.com
__________________
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
#2
Looks great. Shoulder harness crossbar height is perfect.
BTW, why are you guys posting to rennlist in the middle of the night? Are you burning the midnight oil working on my Guards red rollbar order? Please say yes...
Also, are you now including a template for the carpet and trim cutout locations so my shop will have a guide?
BTW, why are you guys posting to rennlist in the middle of the night? Are you burning the midnight oil working on my Guards red rollbar order? Please say yes...
Also, are you now including a template for the carpet and trim cutout locations so my shop will have a guide?
#3
I hope I'm wrong, but it looks like Pacific Porsche mounted the Schroth shoulder harnesses incorrectly. The straight line above the stitched "Schroth Racing" on the webbing is supposed to be toward the centerline, not the outer edges. It matters, because the buckle tabs are offset to click into the camlock at the correct angle. Because they have them reversed, both tabs will be entering the camlock incorrectly. Might want to let them know.
See below pics for correct orientation:
See below pics for correct orientation:
#4
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Jul 2015
Posts: 4,290
Likes: 553
From: Huntington Beach, California