Mark this thread as Unsold
For Sale: Turner Sultan 29" Mountain Bike and Carbon Wheelset
#1
Turner Sultan 29" Mountain Bike and Carbon Wheelset
2012 Turner Sultan 29" Full Suspension and Fully ready to ride Mountain Bike - $3000
Bike is in perfect shape. It was just re-built/serviced by the shop it was purchased from in Austin (Cycle Progression). Brakes were bled, head serviced, all pivots repacked with grease, tire full of new stans (tubeless). Cycle Progression will also be shipping it.
With a 34x140mm Fork, the bike is feels indestructible. It's setup perfectly for the trails in Austin. I hate to see it go, but I only have room for one bike.
This bike Weighs just under 28lb with this configuration and with the carbon wheels it's about 27. It was about $6500 new.
Bile Equipment:
Carbon Wheels: $900
Reynolds Carbon Trail 29er Wheels setup for 142x12. AWESOME wheels.
I sent to Reynolds to have trued and new bearings/spokes installed - but ended up buying a new bike with a set of wheels already installed, so I don't need these anymore. They are bulletproof.
less than 1600g for All mountain wheels is very light indeed. These wheels are over $2K new.
Bike is in perfect shape. It was just re-built/serviced by the shop it was purchased from in Austin (Cycle Progression). Brakes were bled, head serviced, all pivots repacked with grease, tire full of new stans (tubeless). Cycle Progression will also be shipping it.
With a 34x140mm Fork, the bike is feels indestructible. It's setup perfectly for the trails in Austin. I hate to see it go, but I only have room for one bike.
This bike Weighs just under 28lb with this configuration and with the carbon wheels it's about 27. It was about $6500 new.
Bile Equipment:
- Turner Sultan 2012 Medium Frame w/142x12, Full black
- Fox Float RL EVO 125mm Rear Shock
- Fox 34 Float “Factory” 140mm FIT front fork w/15mm axle, set to 130mm (perfect)
- NoTubes/Stans Flow Wheels and Hope Pro II hubs (perfectly straight)
- Specialized Ground Control 29x2.1 Tires (75% life left)
- WTB Pure Team Seat /Ti rails in Black
- Easton Haven Carbon Post
- Syntace Vector Carbon 318 Riser Bar, 8 Degrees
- Ritchey 100mm Stem
- Foam grips
- XTR Shifters
- XTR Dyna-sys front derailleur
- XTR Cassette
- XT Plus Dyna-sys rear derailleur medium cage (almost new)
- XT Dynasys Crank
- Hope M4 Brakes (4-piston) 180/160mm
Carbon Wheels: $900
Reynolds Carbon Trail 29er Wheels setup for 142x12. AWESOME wheels.
I sent to Reynolds to have trued and new bearings/spokes installed - but ended up buying a new bike with a set of wheels already installed, so I don't need these anymore. They are bulletproof.
less than 1600g for All mountain wheels is very light indeed. These wheels are over $2K new.
Last edited by ShakeNBake; 01-20-2014 at 12:42 AM.