Mark this thread as Unsold
Free: 944 control arm, spindle, and strut
#1
Burning Brakes
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Porsche 944 control arm, spindle, and strut from a 1988 944. (RIGHT SIDE, PASSENGER)
Part number for the control arm is 951.341.150.10. The part # 951.341.150.10 is the part number for the arm without bushings. Amusedly, this reference does not exist because you cannot purchase unfinished arms anywhere. The part number to look up is 944-341-028-02-M100.
Should work on 944/944S/944 Turbo (1987-88), 944S2 (1989-91), 968 (1992-95). I did my best to research these, so if im wrong please let me know.
Ball joint boot is torn, but control arm is good and rebuildable, Spindle looks ok, as does the strut. I picked this up from local pick and pull, and didnt need it.
Sorry, local pickup only. Colorado Springs, CO.
Part number for the control arm is 951.341.150.10. The part # 951.341.150.10 is the part number for the arm without bushings. Amusedly, this reference does not exist because you cannot purchase unfinished arms anywhere. The part number to look up is 944-341-028-02-M100.
Should work on 944/944S/944 Turbo (1987-88), 944S2 (1989-91), 968 (1992-95). I did my best to research these, so if im wrong please let me know.
Ball joint boot is torn, but control arm is good and rebuildable, Spindle looks ok, as does the strut. I picked this up from local pick and pull, and didnt need it.
Sorry, local pickup only. Colorado Springs, CO.
Last edited by HICKS; 12-18-2011 at 09:02 PM.