When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Purchased these from a vendor here on Rennlist, these work great and a must have if you work on your car.
Asking $50.00 shipped USPS in the continental US Priority Mail.
From the original seller: (Apologies in advance for the cut and paste) "These will provide a little distance so the ends of your jack saddle does not damage the surrounding underside of your car. Protects under-coating and paint. They also provide a little extension to not damage mild side skirts.
Made of hard slip-resistant rubber (91 durometers) and aircraft quality aluminum tops. Rubber portion has been counter-bored and the aluminum top is secured with a ¼-20 hex bolt. Just insert, turn 90 degrees and proceed with your jack. To remove, just turn back 90 degrees and remove after work procedure is done. I have a full set of four for only $60 and this includes USPS Priority (2-3 day) shipping in the Continental US.
These will work on any of the water-cooled Porsche sports cars (996, 997, 986, 987, 991, 992, 718, Boxster, Cayman, etc.) and the 993 and will fit all variants like the GT3, Turbo, GT2, and GT4. They will also work on the '87-'94 911 but will have a slightly looser fit. These are NOT for the SUVs, 944/928, pre-1987 911, nor Panamera and they will NOT fit 2020 model year 911 Carreras and newer. For 2020 and newer Caymans and Boxsters please check your jack points, they should have an oval looking hole as opposed to a round hole. I have confirmation that the 2020 and 2021 Cayman GT4 have an oval hole at the jack points. If oval, these will work. The rubber part is sturdy and is 3 inches in diameter and about an inch thick."
09-30-2023 | 04:24 PM
Used lift pucks
