Mark this thread as Sold
For Sale: Andial/Mahle 3.0L Turbo Pistons
#2
What head were you plannig on running with these? And how much compression was that suppose to give you?
968 head = 46cc estimate, higher compression
951 head = 56cc estimate ,lower compression
EDIT: I did a search on that part number. Here is what pulled up.
BORE - 104.5 mm
STROKE - 88.0 mm
COMPRESSION - 8.0:1
USE - 2 Valve Head/3.0 Block
SO. these are for the 951 head that will give 8:1 Compression.
968 head = 46cc estimate, higher compression
951 head = 56cc estimate ,lower compression
EDIT: I did a search on that part number. Here is what pulled up.
BORE - 104.5 mm
STROKE - 88.0 mm
COMPRESSION - 8.0:1
USE - 2 Valve Head/3.0 Block
SO. these are for the 951 head that will give 8:1 Compression.
Last edited by 95ONE; 01-15-2009 at 10:09 AM.
#5
The Impaler
Rennlist Member
Rennlist Member
What head were you plannig on running with these? And how much compression was that suppose to give you?
968 head = 46cc estimate, higher compression
951 head = 56cc estimate ,lower compression
EDIT: I did a search on that part number. Here is what pulled up.
BORE - 104.5 mm
STROKE - 88.0 mm
COMPRESSION - 8.0:1
USE - 2 Valve Head/3.0 Block
SO. these are for the 951 head that will give 8:1 Compression.
968 head = 46cc estimate, higher compression
951 head = 56cc estimate ,lower compression
EDIT: I did a search on that part number. Here is what pulled up.
BORE - 104.5 mm
STROKE - 88.0 mm
COMPRESSION - 8.0:1
USE - 2 Valve Head/3.0 Block
SO. these are for the 951 head that will give 8:1 Compression.
So what would that be on the 968 head? Over 9:1?
#7
Rennlist Member
What head were you plannig on running with these? And how much compression was that suppose to give you?
968 head = 46cc estimate, higher compression
951 head = 56cc estimate ,lower compression
EDIT: I did a search on that part number. Here is what pulled up.
BORE - 104.5 mm
STROKE - 88.0 mm
COMPRESSION - 8.0:1
USE - 2 Valve Head/3.0 Block
SO. these are for the 951 head that will give 8:1 Compression.
968 head = 46cc estimate, higher compression
951 head = 56cc estimate ,lower compression
EDIT: I did a search on that part number. Here is what pulled up.
BORE - 104.5 mm
STROKE - 88.0 mm
COMPRESSION - 8.0:1
USE - 2 Valve Head/3.0 Block
SO. these are for the 951 head that will give 8:1 Compression.