Updating a MoTeC V2 Camera Configuration
06-05-2017 | 03:57 PM
#1
Thread Starter
Drifting
Joined: Jul 2009
Posts: 3,278
Likes: 25
From: Black Sheep Racing World HQ
Updating a MoTeC V2 Camera Configuration
Can anyone provide a step-by-step for updating a MoTeC V2 camera configuration?
After loading a new camera config this past weekend, the camera failed to record anything. After the first attempt, I remembered the shop's data guy said you needed to wipe the card of all data after loading (power cycling the camera). I tried it again including that extra step, but got the same - no video file recorded.
Thanks in advance for any insights.
After loading a new camera config this past weekend, the camera failed to record anything. After the first attempt, I remembered the shop's data guy said you needed to wipe the card of all data after loading (power cycling the camera). I tried it again including that extra step, but got the same - no video file recorded.
Thanks in advance for any insights.
06-05-2017 | 05:06 PM
#2
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Joined: Jun 2008
Posts: 19,239
Likes: 3,400
From: Durham, NC and Virginia International Raceway
Call the Mooresville office and they'll walk you through it. I had to do it more than once. TEDean might chime in, too.
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway