Notices

PRI 2023 info from AiM

Thread Tools
 
Search this Thread
 
Old 12-10-2023 | 09:37 AM
  #1  
Matt Romanowski's Avatar
Matt Romanowski
Thread Starter
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member


Rennlist
Site Sponsor
 
Joined: Dec 2001
Posts: 12,741
Likes: 1,037
From: Manchester, NH
Default PRI 2023 info from AiM

I know Bob and Nadine were there, a lot of friends, and a ton of fun was had. I can honestly say it was the best PRI for me in over 15 years. I had a blast, was really recharged, and I am really excited for the year to come.

I was terrible about photos, but I'll do what I can below. AiM showed the new ACC2 that managed 0-5 and 0-12 volt sensors along with thermocouples. Coming soon is the open version where you can use it with any data system that has CAN input! The LCU One S was also shown and will be out soon. A new controller in a new package, it's smaller, lighter, and will be available in an open CAN configuration for use with ECUs and other data systems. I didn't get good photos, but there was an update to the SW4 faces and GT32 steering wheel introduced. The GT32 will replace the FW3, have the buttons and rotaries built in with a CAN output that will work with any current AiM system or you can use it in a CAN open format with any other data system! The MXT 10" screen was shown as a standalone and arrived for shipping at the office! The first ones have been sold....

One of the most exciting things was the K8 Keypad. Very easy integration with AiM systems and in the open configuration, it will make keypad integration with other systems much, much easier! They keypad has a great feel, superb customization of the buttons, and the classic AiM support everyone knows!

For future items, not available now or the near future, the ECU Log and X Log. Think of them as being a sort of Solo 2 DL without a screen, but they can be much more. Details will come in time...

Post up any questions you have and feel free to reach out to me if you have are interested in AiM of need any help!


I can't wait to have these in stock!

LCU One S - for AiM and ECUs!

The MXT is here!

Future developments - think Solo 2 DL without a screen.......


Old 12-10-2023 | 09:52 AM
  #2  
freeride's Avatar
freeride
Instructor
 
Joined: Mar 2017
Posts: 176
Likes: 54
Default

Good stuff Matt!
ACC2 looks like exactly what I "need". Availability?
Old 12-10-2023 | 10:15 AM
  #3  
Matt Romanowski's Avatar
Matt Romanowski
Thread Starter
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member


Rennlist
Site Sponsor
 
Joined: Dec 2001
Posts: 12,741
Likes: 1,037
From: Manchester, NH
Default

Originally Posted by freeride
Good stuff Matt!
ACC2 looks like exactly what I "need". Availability?
It should be a month or two from what I am told and believe. It's really just the electronics inside that have some changes from the ACC, so the hardware, design, and config are done. It's down to production time and the AiM elves are very busy right now.
Old 02-10-2024 | 09:44 AM
  #4  
freeride's Avatar
freeride
Instructor
 
Joined: Mar 2017
Posts: 176
Likes: 54
Default

Originally Posted by Matt Romanowski
It should be a month or two from what I am told and believe. It's really just the electronics inside that have some changes from the ACC, so the hardware, design, and config are done. It's down to production time and the AiM elves are very busy right now.
Guess what Matt? 2 months.
I keep checking your website.
Old 02-10-2024 | 11:40 AM
  #5  
Matt Romanowski's Avatar
Matt Romanowski
Thread Starter
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member


Rennlist
Site Sponsor
 
Joined: Dec 2001
Posts: 12,741
Likes: 1,037
From: Manchester, NH
Default

Originally Posted by freeride
Guess what Matt? 2 months.
I keep checking your website.
LOL. I believe the ACC2 / Open are coming pretty soon. I'm not sure on keypads and LCU One S.
Old 02-10-2024 | 11:42 AM
  #6  
freeride's Avatar
freeride
Instructor
 
Joined: Mar 2017
Posts: 176
Likes: 54
Default

Sweet, that's my top choice.



Quick Reply: PRI 2023 info from AiM



All times are GMT -3. The time now is 03:05 PM.