Smarty Cam boot problem
06-01-2018, 11:19 PM
#1
Burning Brakes
Thread Starter
Smarty Cam boot problem
I've got an original (non HD) Smarty Cam and just recently it refuses to boot up past the opening screen with the penguin. Doesn't matter if I'm powering it from the wall supply or my Solo DL, it hangs up at the opening screen and won't go past that point. Any ideas for corrective action?
06-02-2018, 08:01 AM
#2
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,157
Received 3,340 Likes
on
1,895 Posts
I've got an original (non HD) Smarty Cam and just recently it refuses to boot up past the opening screen with the penguin. Doesn't matter if I'm powering it from the wall supply or my Solo DL, it hangs up at the opening screen and won't go past that point. Any ideas for corrective action?
06-02-2018, 09:17 AM
#3
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
I can't remember how, but there is a button combo to make a hard reboot. If that doesn't work, it has to go in.
06-02-2018, 08:04 PM
#4
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,157
Received 3,340 Likes
on
1,895 Posts
I have less success with hard boots than reloading firmware using the hard boot button sequence and 1.03.14 firmware on the mSD card.