It's always a treat when a client calls you, let's you know about a car in his collection, and basically wants a service that enhances a car already amazing, to another level. We got a call from such a client and were told a CGT would be showing up at our door step by the end of day. So, sit back, grab some snacks, and follow us on our journey:

Cleaning Process:



Never was a big fan of the greasy tire dressing look







Foam is actually a citrus-based auto wash that is a pre-clean to an actual wash. A wash before a wash
















Very little precaution is necessary on newer engine compartments. Just consult your owner's manual or a specialized technician. In this case, we simply covered the intakes to not allow water inside
















A unique polishing soap from Germany safely and effectively cleans the bare metal inside these tips




As any of you that are a family business can relate to, one of the best surprises is when your kids can come hang out with you. My daughter is my best employee in training. She loves and bubbles and couldn't resist






Washmitt is rinsed after cleaning each panel from top to bottom. This assures no contaminants are introduced back into the clean soap bucket










You can see those little hairline scratches in the paint surface around the sun reflection. It's actually in the clearcoat



Look at 4 or 5 o'clock around the sun reflection. Notice how it's not a clear reflection, rather lots of small little lines



Now notice around 12 and 6 o'clock around sun reflection. Those are sand marks during the paint finishing process from factory



Look at patch around 5 o'clock around sun reflection. Those aren't clouds in the sky. It's more sand marks just different area of hood



We used a unique polisher that safely eliminates all imperfections from clearcoat surface while not damaging the surface. The process is very time consuming, but safety and consistent result is the goal



Anything that can be removed either for safety of the part or for ease of technician access for proper results, is done



Polish dust is a by-product of the countless hours of using various polishes and polishing pads. The vehicle gets another bath after this process is complete



Experience allows us to be able properly and systematically remove parts, catalog them, and replace them without damaging anything or losing anything



Proper precautions were taken prior to polishing interior carbon fiber





Porsche uses a unique tape for the contact between carbon fiver and seat back protector and floor mats. We not only taped up to protect the contact point, but notice the bottom of roll bars that are taped to protect leather from polishing