Detailed my GR 997 GT3
#17
Odd Posts
Rennlist Member
Rennlist Member
Nice job. I am about halfway through mine...
So far have done the clay bar, PC with orange pad and Meguiar's #2 and #9 swirl removers and then the PC with white pad and cleaner wax (#1 in the Mother's 3 step program). There are still a few scratches that I cannot get out, but I am not going to try any harder... I don't want to cut too much more for fear of burning through the clear coat.
I typically apply at 1 to 2 and then buff at 4.5. The PC vibrates a ton, but I am using power tool gloves which helps.
So far have done the clay bar, PC with orange pad and Meguiar's #2 and #9 swirl removers and then the PC with white pad and cleaner wax (#1 in the Mother's 3 step program). There are still a few scratches that I cannot get out, but I am not going to try any harder... I don't want to cut too much more for fear of burning through the clear coat.
I typically apply at 1 to 2 and then buff at 4.5. The PC vibrates a ton, but I am using power tool gloves which helps.