OK, I've got a clear bra installed on my car.

After a few track days on my car, I've now got some streaks of rubber from the track on both the clear bra and non-covered portions. When I washed the car, the rubber on the non-covered portion of the car came off very easily.

However, the rubber on the clear bra does not come off that easily. I hesitate to rub really hard to try to get it off for fear of scratching the film.

Are there any solvents or cleaners that anyone can recommend to get this stuff off?

Thanks in advance.

 

try a little WD-40 on a paper towel in a small spot. I'll use this on the paint for stubborn spots, but it DOES take off wax as well. my clearbra installer said the film should be waxed like the paint.

 

Make sure you wax the clearbra just like the paint! Next time it will all wipe off easy

 

same happens to mine on track days, treat it like your paint, polish and seal

 

For the sake of future searchers, claybar also works well... Had to remove tire marks yesterday, and comparing the clay vs. wd40, I prefer the clay.

 

Isopropyl Alcohol is the best for removing marks. Otherwise any polish cleaner works well, non abrasive. Treat the clear bra like paint and wax regularly.