Instrument Cluster Display
 

Hello everyone, How do I set the far left instrument cluster to display the road / speed limit signs? My Nav would show them but I just can't figure it out in the instrument cluster.

I don't think it is possible. In my Panamera it shows it on the far left but the Cayenne doesn't have the same option box under settings.

speed limit signs
 

In the 2019 Cayenne, it seems you cannot display Nav system-generated speed limit signs in the instrument cluster. I tried long and hard to find a way to display the speed limit in the instrument cluster's map display (which my 911 does), but without success. So to see the speed limit being reported by the Nav system in the Cayenne, I've found it s necessary to look away and down to the PCM's Nav display. Really frustrating Porsche would do this, but apparently that's the way it designed the system.

Wait. You can't get it to show the little roadsign with the posted speed limit +right in the speedo??

The left screen cluster is usless to me

https://cimg0.ibsrv.net/gimg/rennlis...c3fa243a7.jpeg
https://cimg9.ibsrv.net/gimg/rennlis...74e823bfe.jpeg
https://cimg1.ibsrv.net/gimg/rennlis...50402d2d6.jpeg

Yeah I spent a good half hour fiddling with it today and going through the same frustration. The manual seems to indicate Tube 1 should be able to show traffic signs. But no luck in trying to change the left hand most part of the cluster (tube 1). Will be watching this thread to see if some one figures this out

Do any of you have the Lane Keep Assist system on your Cayenne. It is my understanding that speed limit and cornering signs are only displayed in the instrument cluster if your vehicle has visual Traffic Sign Recognition. From what I understand reading Porsche's literature, this feature is bundled together with the Lane Keep Assist option on the Cayenne.

I am interested in this also, but it seems to be part of the Innodrive option. I have this on my Panamera, and it is nice. Can you see the Speed Limit sign on the Map display?

Yeah I'd read that the speed limit signs are part of Innodrive but had assumed/hoped that it was also there with ACC. I've gotten very used to this feature in my (much cheaper) other vehicles.

Here's a question: if you have Innodrive but are not currently using it, do the speed limit signs still show up?

I agree. The Panamera was ordered with the Innodrive and I had the feature on my 2014 Cayenne so I assumed it would be included with the latest version of the PCM. You can configure the tube to show the speed limit sign along with traffic signs with the Innodrive off.

I have Innodrive on my Cayenne Turbo and yes the speed limit signs show up in the far left tube even when not using Innodrive. Hope that helps.

So we are saying that only with innodrive, the speed limits signs show in tube 1. Also there was another thread that said innodrive is needed to show the speed limit signs in the HUD. That is very bad and I hope that Porsche updates the system via a software update to allow non innodrive folks to see the signs.