When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Finally got my plates, really like this kit. You can quick remove it with the way the springs work and place it nearly anywhere on the grill. Dog decided to hang out so took the pic with her in it. https://carbonio.com/products/porsch...cayenne~pv_all
Where did you get the front Cayenne Model Designation plate ?
Originally Posted by Fly121
Does anyone know where to purchase a 2019 Cayenne european license plate holder?
I have the euro license plate but need the bracket/plate to mount it against.
I've searched the internet with no luck yet.
Hey folks. As I'm awaiting my '22 Cayenne S, I'm looking to buy a tow hook license plate holder and my research narrowed down to 3 options. If you own one of these would you recommend it, or is there something you don't like about it:
Hey folks. As I'm awaiting my '22 Cayenne S, I'm looking to buy a tow hook license plate holder and my research narrowed down to 3 options. If you own one of these would you recommend it, or is there something you don't like about it:
How did you guys pop off the tow hook cover? can't figure it out. need to install one...
Push down firmly on the top part of the cover and it will pop off. The clip holding the cover is behind the bottom portion. I'd take a video now, but my wife drives the car to work.
I just ordered this, anyone use like rubber stopper or some sort around the area that is in close proximity to bumper? I think driving like this would bend or flex this thing and cause permanent damage to the bumper.
Originally Posted by byungwook
Merry Christmas!
Late update here.
I installed Sto-n-Sho a couple of weeks ago and last night I put the plates on finally as they were delivered yesterday.
The overall design is good and the look is also ok. But, I don't like the fact that the bottom part of the bumper is made of very thin plastic and I'm wondering how much it would last with just two screws. (and it is very easy to tighten the screws up too much as you cannot really tell if they went deep enough or not, since the plastic is so thin.)
To secure the installation, I put 3M VHB double sided mounting tape between the bracket and the bumper bottom and I hope it would help.
Here are some pictures:
By the way, I bought silicon license plate frames from Amazon to prevent any noise and also I don't want to carry the advertisement of the dealership all the time.
12-07-2021, 06:43 PM
