2019 Cayenne Front License Plate
#61
Racer
Reviving this thread to see if anyone had used the Platypus mount on their Turbo (or Sport front fascia) Cayennes https://www.cravenspeed.com/front-li...cayenne-turbo/
#62
You'll see on their site that they don't have that model available yet. The SKU is "NOTYET-229".
They do have one for the base model, which looks like it's a similar application because the mounting point is offset to the edge of the plate, but I don't know for sure if this will work on the Turbo with the Sport Design fascia. If you decide to try it out, let us know! https://www.cravenspeed.com/front-li...rsche-cayenne/
They do have one for the base model, which looks like it's a similar application because the mounting point is offset to the edge of the plate, but I don't know for sure if this will work on the Turbo with the Sport Design fascia. If you decide to try it out, let us know! https://www.cravenspeed.com/front-li...rsche-cayenne/
#64
Racer
You'll see on their site that they don't have that model available yet. The SKU is "NOTYET-229".
They do have one for the base model, which looks like it's a similar application because the mounting point is offset to the edge of the plate, but I don't know for sure if this will work on the Turbo with the Sport Design fascia. If you decide to try it out, let us know! https://www.cravenspeed.com/front-li...rsche-cayenne/
They do have one for the base model, which looks like it's a similar application because the mounting point is offset to the edge of the plate, but I don't know for sure if this will work on the Turbo with the Sport Design fascia. If you decide to try it out, let us know! https://www.cravenspeed.com/front-li...rsche-cayenne/
#65
Front Plate
I used the caps from the plate frame to cover the dealer drilled holes.
Only put the bracket on for road trips.
Not perfect but a good option if the holes are already there.
Frame caps
Only put the bracket on for road trips.
Not perfect but a good option if the holes are already there.
Frame caps
The following users liked this post:
NelsonLee (11-11-2020)
#66
Has anyone tried Sly Brackets?
I'm interested in knowing how good it is.
https://www.slybrackets.com/store/
Thanks,
BK
I'm interested in knowing how good it is.
https://www.slybrackets.com/store/
Thanks,
BK
#68
Has anyone tried Sly Brackets?
I'm interested in knowing how good it is.
https://www.slybrackets.com/store/
Thanks,
BK
I'm interested in knowing how good it is.
https://www.slybrackets.com/store/
Thanks,
BK
You need to be careful that whatever you use, it does not block/interfere with your radar detector lens.
I used shopnsho, and it worked great...More details are in the posts above..
________________
Last edited by PorscheACC; 12-10-2020 at 02:35 AM.
#69
Thanks for the quick reply.
I was looking for something easier to install than shopnsho as some people said that it's hard to install it under the bumper...
I just ordered one, as I don't want to risk of getting a $196 ticket for an extended time. Let's see how it goes.
I was looking for something easier to install than shopnsho as some people said that it's hard to install it under the bumper...
I just ordered one, as I don't want to risk of getting a $196 ticket for an extended time. Let's see how it goes.
#71
Merry Christmas!
Late update here.
I installed Sto-n-Sho a couple of weeks ago and last night I put the plates on finally as they were delivered yesterday.
The overall design is good and the look is also ok. But, I don't like the fact that the bottom part of the bumper is made of very thin plastic and I'm wondering how much it would last with just two screws. (and it is very easy to tighten the screws up too much as you cannot really tell if they went deep enough or not, since the plastic is so thin.)
To secure the installation, I put 3M VHB double sided mounting tape between the bracket and the bumper bottom and I hope it would help.
Here are some pictures:
By the way, I bought silicon license plate frames from Amazon to prevent any noise and also I don't want to carry the advertisement of the dealership all the time.
Late update here.
I installed Sto-n-Sho a couple of weeks ago and last night I put the plates on finally as they were delivered yesterday.
The overall design is good and the look is also ok. But, I don't like the fact that the bottom part of the bumper is made of very thin plastic and I'm wondering how much it would last with just two screws. (and it is very easy to tighten the screws up too much as you cannot really tell if they went deep enough or not, since the plastic is so thin.)
To secure the installation, I put 3M VHB double sided mounting tape between the bracket and the bumper bottom and I hope it would help.
Here are some pictures:
By the way, I bought silicon license plate frames from Amazon to prevent any noise and also I don't want to carry the advertisement of the dealership all the time.
Last edited by byungwook; 12-25-2020 at 08:54 PM. Reason: typo
The following users liked this post:
PorscheACC (03-08-2021)
#72
I have used the RHO-Plate for all my Porsches so far and have been very happy with them.
https://www.rho-plate.com/products/p...9-rho-plate-v2
https://www.rho-plate.com/products/p...9-rho-plate-v2
#74
#75
Rennlist Member
Thread revival. Just ordered this for my 20 Cayenne S.
https://carbonio.com/products/porsch...cayenne~pv_all
I have a different Carbonio mount for my Cayman that I’m very happy with. Hopefully this one is as easy to install and works just as good. I don’t have radar cruise so no issue there, but you can slide it to the side of the grill if you do.
https://carbonio.com/products/porsch...cayenne~pv_all
I have a different Carbonio mount for my Cayman that I’m very happy with. Hopefully this one is as easy to install and works just as good. I don’t have radar cruise so no issue there, but you can slide it to the side of the grill if you do.