Notices
Cayenne 958 - 2011-2018 2nd Generation
Sponsored By:
Sponsored By:

Misfire, no Code, pining noise under load

Thread Tools
 
Search this Thread
 
Old 10-31-2022, 12:03 PM
  #1  
patpatpat
Intermediate
Thread Starter
 
patpatpat's Avatar
 
Join Date: Sep 2021
Posts: 26
Likes: 0
Received 7 Likes on 4 Posts
Default Misfire, no Code, pining noise under load

Looking for some help in diagnosing a misfire on my 958.2 w/VR6 base engine. I don't have any CEL codes. Photos are livestream data during idle after 20min drive. You can really hear the pinging noise inside the cabin during hard acceleration. Normal city drive - no pinging that I could hear.

Thanks in advance
  • Always 93 gas
  • coils and plugs 10k miles old
  • liqi moly valve cleaner 5k miles ago. Caused O2 sensor fault (bank 1 sensor 1), but never came back after code removal
  • 100k mi on the clock






Last edited by patpatpat; 10-31-2022 at 12:58 PM.
Old 10-31-2022, 12:57 PM
  #2  
patpatpat
Intermediate
Thread Starter
 
patpatpat's Avatar
 
Join Date: Sep 2021
Posts: 26
Likes: 0
Received 7 Likes on 4 Posts
Default



just checked plug and coil. Both looked normal
Old 10-31-2022, 09:33 PM
  #3  
garrett376
RL Community Team
Rennlist Member
 
garrett376's Avatar
 
Join Date: Oct 2003
Posts: 7,472
Received 628 Likes on 482 Posts
Default

With no fault codes, and lots of pinging, bad gas would be the #1 reason. Get rid of that gas, get a new batch, and re-test.
Old 10-31-2022, 10:08 PM
  #4  
patpatpat
Intermediate
Thread Starter
 
patpatpat's Avatar
 
Join Date: Sep 2021
Posts: 26
Likes: 0
Received 7 Likes on 4 Posts
Default

I will give new gas a shot. All my fill ups has been from the same Mobil station here in the east coast.



Quick Reply: Misfire, no Code, pining noise under load



All times are GMT -3. The time now is 01:37 PM.