Wummering, Card(ig)an Shafts, and Good (?) Vibrations
#17
Instructor
Thread Starter
Join Date: Oct 2007
Location: MA
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
#21
Addict
Rennlist Member
Rennlist Member
Join Date: Sep 2003
Location: Saratoga, CA
Posts: 993
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I am about to get nekid (July) on an Apri 2004 build. Never had any issues, BUT ... I have trannsmission control box scheduled for June. Just got the coils replaced. Would it be a good idea to report that I have "X" problem, where X is the Cardan Shaft conditions. If so, what is X? Humming noise at speed? Vibrations? Any help would be appreciated.
#22
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Did I get that right? If so, just tell them that, without the formula.
In any case, any valid complaint that you report before the warranty runs out could, in theory, be helpful. Many people here can weigh in on whether theory ever bears on reality.
#23
Instructor
Thread Starter
Join Date: Oct 2007
Location: MA
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here's the story they gave me: When the car was finished, they brought it over to be washed. Someone left the key in the ignition, and hence the car did not go to sleep. When I went to pick it up, the battery was low, it tripped the steering angle sensor and the PSM warning light came on.
They charged the battery all day, and it drove fine homw, and to work today.
Another tech rep BS meter going haywire again?
They charged the battery all day, and it drove fine homw, and to work today.
Another tech rep BS meter going haywire again?