986 transaxle bellhousing pattern needed :(
#1
Intermediate
Thread Starter
Join Date: Aug 2004
Location: Albany, NY
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
986 transaxle bellhousing pattern needed :(
This is an odd request for most people, but I'm looking to see if anyone here has in possession, or has access to, a 986 transaxle and has the ability to make me a traced template of the bellhousing pattern with all relative bolt holes, starter bolt holes, and the input shaft centerline. It would have to be pretty darn accurate template, traced onto something like heavyweight manilla paper or similar material that won't get too flimsy when trying to measure it for a CAD.
I'm looking for both the 5 speed pattern, and the Boxster S / 996 bellhousing pattern.
I'm willing to donate some money to the person that can do this for me for your time and effort(and of course shipping of the template to em). I'm attempting to test the waters here in fabricating an adapter to utilize a 986 transaxle here on a project of mine but can't afford to purchase one outright yet on the whim that it may or may not work at all This time of year money is tight.
Any help would be greatly appreciate and if not, well, it's still appreciated none the less
Thanks folks
-Adam
I'm looking for both the 5 speed pattern, and the Boxster S / 996 bellhousing pattern.
I'm willing to donate some money to the person that can do this for me for your time and effort(and of course shipping of the template to em). I'm attempting to test the waters here in fabricating an adapter to utilize a 986 transaxle here on a project of mine but can't afford to purchase one outright yet on the whim that it may or may not work at all This time of year money is tight.
Any help would be greatly appreciate and if not, well, it's still appreciated none the less
Thanks folks
-Adam
Last edited by JadedSilver; 12-09-2007 at 05:27 PM.