Premier

We at Premier Protective Films are proud to add a new product to our PF1 line up - PF1 TTR. Over the years, we were constantly asked what can be used to remove cone marks as well as other debris transfer onto the clear bra. We have finally completed testing of our new proudct 2 months ago and now bringing it to the market.

PF1 TTR is an advanced agent that is created for the surface of your clear bra. It attacks the marks and transfers at the micro-level to loosen up these particles so that it may be safely wiped off with a clean microfiber towel. Most importantly, PF1 TTR can be utilized on paint protection film with a clearcoat or topcoat safely.

Simply clean the area in which PF1 TTR will be applied. Next spray on and allow for TTR to start working right away. In five seconds, begin wiping with a clean microfiber towel. Repeat these steps as needed.

Premier

Here we have a vehicle that had a run in with a concrete pole in a parking lot. There were deep abrasions in the clear bra, that fortunately if not for the clear bra, the bumper would have needed a repaint. This incident occured 9 months ago and at that time we could not find a way to remove the black marks as they seemed to have permanently burned itself to the clear bra.

Upon contacting our customer for testing of the product, he was more than happy to bring his vehicle in for our PF1 TTR test. In 10 minutes time, the black marks were removed. The scratches / abrasions remained, but the visible black transfer was taken off.

**Cost for the PF1 TTR in our 16oz bottle is $20 + shipping. For orders, please contact our sales staff by phone at 510-623-1308.

**Wholesale inquiries welcome, please contact David - david@premiermobilegroup.com . Please have resale / business license prepared