RJKflyer

Am interested in experience as noted above, specifically, so please not on any other model (as I've read the various posts).

I am very interested, but/and would love to be able to persuade TPC to change the LED functionality as I really do not find a flashing light appealing, especially at night. Yes, yes, I know many will say "it is fine" but YMMV etc...

So, please also add a vote if you too would like a different LED behaviour!

I was really hoping that their soon-to-be-released DIY software would address this point!

TT Surgeon

Member akunob here and on 6speed has used it extensively on his turbo s. he has a long thread over on 6 speed
http://www.6speedonline.com/forums/9...ck-review.html

cjcam930

The LED doesn't bother me, but I like someone's earlier suggestion of mode1 off, mode2 on solid, mode3 blink. It's hard to distinguish between mode2 and 3 while driving.

ChristianR

i am thinking about this product as well, i keep reading it has 3 settings, how do you change settings?

i always drive my car in sport chrono with both lights on the suspension button.

cjcam930

You just use the normal shock settings (PASM) button but now it has 3 settings instead of 2.

808c2s

With the TPC DSC module installed, the PASM button stays on for Mode 1. When you press the PASM button, it blinks twice for Mode 2. Press again and it blinks three times for Mode 3. Press one more time and it goes back to Mode 1 again.

RJKflyer

Thanks, not sure why/how I missed that...!

ChristianR

thanks