A modified wing
#16
Originally Posted by cakM3
I like the front lip spoiler and rear wing setup on this much better. Looks aggressive but not out of place.
#17
Three Wheelin'
I remember seeing your posts earlier when you first showed the car and thinking what a great job you had done improving the car without junking it up.
I am sorry to hear they are not available anymore - to the OP, if you want to match that look maybe there's a market out there...
Ed
I am sorry to hear they are not available anymore - to the OP, if you want to match that look maybe there's a market out there...
Ed
#18
Originally Posted by lliejk
I remember seeing your posts earlier when you first showed the car and thinking what a great job you had done improving the car without junking it up.
I am sorry to hear they are not available anymore - to the OP, if you want to match that look maybe there's a market out there...
Ed
I am sorry to hear they are not available anymore - to the OP, if you want to match that look maybe there's a market out there...
Ed
For full clarity, I believe you can still get the decklid/wing but they will need to custom make it. Even then, will need to get a local body shop to custom fit it, sand/prime it and paint. Not sure of the shop who is making it but you can contact JL Motoring to get details. Here's link to how I found them.
https://www.jl-motoring.com/Porsche_...p/pots9707.htm
#19
Racer
I agree with the comments above, the wider wing is great. The height not so much and the angle of attack is a bit extreme. All of this is my opinion.
If you can modify it to look more like the Vorsteiner's height and angle of attack, you would have an impressive and not ordinary wing without going too much over the top.
Ed
If you can modify it to look more like the Vorsteiner's height and angle of attack, you would have an impressive and not ordinary wing without going too much over the top.
Ed
The following users liked this post:
IMI A (07-03-2020)
#21
Three Wheelin'
Who makes your GT2RS clone?
Ed
Ed
#22
NR Automotive used an OEM GT2RS wing / deck lid to make their mold and produce high quality Carbon Fiber parts. The fit was perfect just needed sanding and paint. You need to contact them for pricing, they also made my CF side intakes as a package deal.
The following users liked this post:
IMI A (07-03-2020)
The following users liked this post:
IMI A (07-03-2020)