Window memory reset
Does the switch press and hold from the 996 work the same on the 997 for the window memory reset? My passenger window does not auto up / one touch unless half way up already.
|
Sounds normal. Mine's done it that way since new. Safety feature if you have a kid in the passenger seat.
|
Originally Posted by Terry Adams
(Post 15962376)
Sounds normal. Mine's done it that way since new. Safety feature if you have a kid in the passenger seat.
|
Mines always behaved like that. Needs to be held to halfway then closes after release
|
Originally Posted by Nate Tempest
(Post 15962565)
Your 997 does that? It's not normal; passenger window should go all the way up if you pull the switch to the auto-up notch. The window reset procedure OP mentioned should resolve it. (I don't recall the exact procedure, but it involves holding the switch after the window is up; a quick search of the forum should find it.
Originally Posted by nzskater
(Post 15963229)
Mines always behaved like that. Needs to be held to halfway then closes after release
|
Originally Posted by Nate Tempest
(Post 15962565)
Your 997 does that? It's not normal; passenger window should go all the way up if you pull the switch to the auto-up notch. The window reset procedure OP mentioned should resolve it. (I don't recall the exact procedure, but it involves holding the switch after the window is up; a quick search of the forum should find it.
Maybe it's a .2 feature not in the .1 |
It is normal. Owners manual states passenger side must be half way up before the auto close feature can be activated.
https://cimg6.ibsrv.net/gimg/rennlis...2988ab0a1e.png |
:cheers:
|
Originally Posted by 8Lug
(Post 15963706)
It is normal. Owners manual states passenger side must be half way up before the auto close feature can be activated.
https://cimg6.ibsrv.net/gimg/rennlis...2988ab0a1e.png |
Originally Posted by 8Lug
(Post 15963706)
It is normal. Owners manual states passenger side must be half way up before the auto close feature can be activated.
|
Originally Posted by ShatterPoints
(Post 15964419)
I didn't think to look in the manual... duh... That settles that. Thanks!
|
If you leave the key in after you turn the engine off, you can still operate SR and windows once. Don't know why, but not safe.
|
Originally Posted by Terry Adams
(Post 15965096)
If you leave the key in after you turn the engine off, you can still operate SR and windows once. Don't know why, but not safe.
|
Originally Posted by nzskater
Mines always behaved like that. Needs to be held to halfway then closes after release
|
Originally Posted by Nate Tempest
(Post 15965302)
You're saying it's only safe to operate windows with the engine on? Why?
Just tried again. Engine off, key out, open/close SR and each window as many times as you wish. But the minute you open the door with key out, no more open/close any. |
All times are GMT -3. The time now is 03:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands