When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1. Mint condition (EXPIRED) Schroth harness set (set of TWO complete harnesses with all mounting brackets) - These were swapped out due to tag expiration in 2016 but they are in mint condition. Black with yellow Schroth logo. Comes with GT3 brackets so you can retain your factory seatbelts as well. These would be great for auto-x or someone that isn't tracking and doesn't care about expiration. I replaced them with the identical set of new harnesses - SOLD
2. OEM GT3 Shifter from 2007 GT3. Only removed because I swapped to a cup car shifter - $250
3. OEM GT3 shift cables. 40k miles on them. Only removed because I swapped to cup car cables - $150
4. Guard LSD insert: This is the 40/60 Guard LSD insert that can be installed in your factory housing. It has approximately 10k miles on the unit and is in good condition. I just upgraded to Guard's Billet Club version - SOLD
Pictures to follow! Thanks.
Last edited by bergx7; 01-28-2017 at 09:17 PM.
Reason: sold items
They are the Porsche GT3 specific Profi II and are standard fitment on the cup cars as I understand it. They are labeled "Porsche GT3 Belts" at the below link. Note that they are "specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which is much easier."
Mine are black with the standard 3 inch shoulder belt.
cool, was just interested in how you adjusted them. I'll take em
Photo attached.
I forgot that I have the slightly narrower shoulder belt on the driver side to make it more comfortable with a Hans device. This is the same staggered setup I run now with the new belts.
Photos of Guard Diff internals below. You will need to install this in your stock housing, just like Guard does (and/or pay them to do it for you). The housing in the photos below is NOT reusable. All the other components are in very good shape, albeit a bit oily (this wasn't a glamour shoot people). First one to paypal gets the kit. Thanks.
01-17-2017, 06:25 PM
x-post: storage unit clean out
