Hi from a new owner
#1
Hi from a new owner
Hi
Short story, got a 2006 Carrera 4S X51 last December, enjoyed the car the entire summer, but the inevitable happed and the C4S moved to a new happy owner while I picked up a 997.2 GT3. What I actually wanted.
The spec is. Basalt black on black interior. Carbon bucket seats with leather/alcantara. Sport chrono,navi and dynamic headlights. Car is claimed to be “none tracked”, which I also get a little sketchy about on a GT3.... However my local Porsche tech looked at all the log data and stated that there is zero over revs and that the ODO/time matches what he would expect for streetcar, all service was done on time at Porsche incl. recall.
I drove the car back home thru 1200km of mainly Autobahn yesterday. What an intense car, and what a completely different animal than the Carrera 4S. I cannot wait to get to actually drive this thing, all tough it will be awhile since winter is coming here. This gives me some time to sort out some minor things.
12 Hours alone in car raises some questions, so I will hit the search function later. If you have answers or input on the below please shoot.
The car will be a summer toy driven with spirit, also for some intense High Alp road driving. Some long hours on the autobahn getting there is nessesary.
- can the bucket seats/bracket be modified to tilt the seat slightly, and can it be lowered as well?
- Should I get all the coolant joints pinned?
- Is the vario-cam bolts worth to worry about?
- What is the best street alignment specs? Car seem to track the truck grooves quite a lot.
- What are the top street tires to choose from?
- How much front suspension rattle and squeaking is normal, as indicated in the manual. Especially on uneven and bumpy roads at really low speeds?
- Can the exhaust be activated all the time by unplugging like a Carrera PSE? Any down sides to that?
- Hiw to spot the difference between a CUP and normal splitter?
- How to adjust/check the rear wing angle?
Last edited by DWNDRAFT; 09-23-2016 at 04:11 PM.
#2
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Post some pictures of your beaut! We'd love to see it. Driving on the Alps in a GT3!! Sounds heavenly.
-Dmitry
-Dmitry
__________________
Your Trusted Source For DIY and Parts
FREE SHIPPING over $99 click here
Porsche Parts | DIY Tech Articles | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
FREE SHIPPING over $99 click here
Porsche Parts | DIY Tech Articles | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
#6
Rennlist Member
Congrats! You can add washers to the front seat rail attachment points (and longer bolts) to tilt the carbon buckets. This is not Porsche approved, however. So do so at your own risk.
#7
Rennlist Member
can the bucket seats/bracket be modified to tilt the seat slightly, and can it be lowered as well?
Lowered by using different side mount brackets: http://www.tarett.com/items/996-997-...slb-detail.htm
Should I get all the coolant joints pinned?
Absolutely, whether pinned or welded, but definitely one of them
Is the vario-cam bolts worth to worry about?
Look at the harmonic dampner from Dundon Motorsports: http://www.dundonmotorsports.com/harmonic-damper
What are the top street tires to choose from?
Michelin PSS (very hard to find now), upcoming Michelin PS4S
How much front suspension rattle and squeaking is normal, as indicated in the manual. Especially on uneven and bumpy roads at really low speeds?
You can hear the suspension noises, but its nothing that should be overbearingly loud. This is something thats hard to explain, as it is somewhat subjective
Can the exhaust be activated all the time by unplugging like a Carrera PSE? Any down sides to that?
Yes it can, but it will log an error code. Also, you will lose some low end grunt and if you have the stock center muffler you will have some drone. If you have a bypass, no drone. A better solution is add the Carnewal PSE controller: http://carnewal.com/products/P87/p97...Manual-Control
How to spot the difference between a CUP and normal splitter?
Cup splitter hangs down much lower and is a lot more flexible
Lowered by using different side mount brackets: http://www.tarett.com/items/996-997-...slb-detail.htm
Should I get all the coolant joints pinned?
Absolutely, whether pinned or welded, but definitely one of them
Is the vario-cam bolts worth to worry about?
Look at the harmonic dampner from Dundon Motorsports: http://www.dundonmotorsports.com/harmonic-damper
What are the top street tires to choose from?
Michelin PSS (very hard to find now), upcoming Michelin PS4S
How much front suspension rattle and squeaking is normal, as indicated in the manual. Especially on uneven and bumpy roads at really low speeds?
You can hear the suspension noises, but its nothing that should be overbearingly loud. This is something thats hard to explain, as it is somewhat subjective
Can the exhaust be activated all the time by unplugging like a Carrera PSE? Any down sides to that?
Yes it can, but it will log an error code. Also, you will lose some low end grunt and if you have the stock center muffler you will have some drone. If you have a bypass, no drone. A better solution is add the Carnewal PSE controller: http://carnewal.com/products/P87/p97...Manual-Control
How to spot the difference between a CUP and normal splitter?
Cup splitter hangs down much lower and is a lot more flexible
Trending Topics
#8
Rennlist Member
can the bucket seats/bracket be modified to tilt the seat slightly, and can it be lowered as well?
Lowered by using different side mount brackets: http://www.tarett.com/items/996-997-...slb-detail.htm
Should I get all the coolant joints pinned?
Absolutely, whether pinned or welded, but definitely one of them
Is the vario-cam bolts worth to worry about?
Look at the harmonic dampner from Dundon Motorsports: http://www.dundonmotorsports.com/harmonic-damper
What are the top street tires to choose from?
Michelin PSS (very hard to find now), upcoming Michelin PS4S
How much front suspension rattle and squeaking is normal, as indicated in the manual. Especially on uneven and bumpy roads at really low speeds?
You can hear the suspension noises, but its nothing that should be overbearingly loud. This is something thats hard to explain, as it is somewhat subjective
Can the exhaust be activated all the time by unplugging like a Carrera PSE? Any down sides to that?
Yes it can, but it will log an error code. Also, you will lose some low end grunt and if you have the stock center muffler you will have some drone. If you have a bypass, no drone. A better solution is add the Carnewal PSE controller: http://carnewal.com/products/P87/p97...Manual-Control
How to spot the difference between a CUP and normal splitter?
Cup splitter hangs down much lower and is a lot more flexible
Lowered by using different side mount brackets: http://www.tarett.com/items/996-997-...slb-detail.htm
Should I get all the coolant joints pinned?
Absolutely, whether pinned or welded, but definitely one of them
Is the vario-cam bolts worth to worry about?
Look at the harmonic dampner from Dundon Motorsports: http://www.dundonmotorsports.com/harmonic-damper
What are the top street tires to choose from?
Michelin PSS (very hard to find now), upcoming Michelin PS4S
How much front suspension rattle and squeaking is normal, as indicated in the manual. Especially on uneven and bumpy roads at really low speeds?
You can hear the suspension noises, but its nothing that should be overbearingly loud. This is something thats hard to explain, as it is somewhat subjective
Can the exhaust be activated all the time by unplugging like a Carrera PSE? Any down sides to that?
Yes it can, but it will log an error code. Also, you will lose some low end grunt and if you have the stock center muffler you will have some drone. If you have a bypass, no drone. A better solution is add the Carnewal PSE controller: http://carnewal.com/products/P87/p97...Manual-Control
How to spot the difference between a CUP and normal splitter?
Cup splitter hangs down much lower and is a lot more flexible
#9
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Feel free to shoot us an email or PM about the variocam bolts. The GT3 with the stock dual mass flywheel is less susceptible to the them backing out, if you want to switch to a LW flightwheel then the damper is a must...
We have nice exhausts and dual cone airboxes as well!
We have nice exhausts and dual cone airboxes as well!
__________________
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
#11
Originally Posted by khooni
Is this only afflicting gt3 997-1 or are 997-2 gt3 and rs affected as well? I am thinking of upgrading my 997-2 rs to 4.0 flywheel and clutch.
#13
^ normal 997.2 GT3 too?
#14
hm, that might work me I guess I can even machine some simple spacers with an angle too.
I found a new rail set that makes it possible to lower and angle the seats, but this is much simpler.
#15
can the bucket seats/bracket be modified to tilt the seat slightly, and can it be lowered as well?
Lowered by using different side mount brackets: http://www.tarett.com/items/996-997-...slb-detail.htm
Should I get all the coolant joints pinned?
Absolutely, whether pinned or welded, but definitely one of them
Is the vario-cam bolts worth to worry about?
Look at the harmonic dampner from Dundon Motorsports: http://www.dundonmotorsports.com/harmonic-damper
What are the top street tires to choose from?
Michelin PSS (very hard to find now), upcoming Michelin PS4S
How much front suspension rattle and squeaking is normal, as indicated in the manual. Especially on uneven and bumpy roads at really low speeds?
You can hear the suspension noises, but its nothing that should be overbearingly loud. This is something thats hard to explain, as it is somewhat subjective
Can the exhaust be activated all the time by unplugging like a Carrera PSE? Any down sides to that?
Yes it can, but it will log an error code. Also, you will lose some low end grunt and if you have the stock center muffler you will have some drone. If you have a bypass, no drone. A better solution is add the Carnewal PSE controller: http://carnewal.com/products/P87/p97...Manual-Control
How to spot the difference between a CUP and normal splitter?
Cup splitter hangs down much lower and is a lot more flexible
Lowered by using different side mount brackets: http://www.tarett.com/items/996-997-...slb-detail.htm
Should I get all the coolant joints pinned?
Absolutely, whether pinned or welded, but definitely one of them
Is the vario-cam bolts worth to worry about?
Look at the harmonic dampner from Dundon Motorsports: http://www.dundonmotorsports.com/harmonic-damper
What are the top street tires to choose from?
Michelin PSS (very hard to find now), upcoming Michelin PS4S
How much front suspension rattle and squeaking is normal, as indicated in the manual. Especially on uneven and bumpy roads at really low speeds?
You can hear the suspension noises, but its nothing that should be overbearingly loud. This is something thats hard to explain, as it is somewhat subjective
Can the exhaust be activated all the time by unplugging like a Carrera PSE? Any down sides to that?
Yes it can, but it will log an error code. Also, you will lose some low end grunt and if you have the stock center muffler you will have some drone. If you have a bypass, no drone. A better solution is add the Carnewal PSE controller: http://carnewal.com/products/P87/p97...Manual-Control
How to spot the difference between a CUP and normal splitter?
Cup splitter hangs down much lower and is a lot more flexible
Great answers right there! Thanks alot!