gt380

hey guys just want to share some photos of my car mounted with new Type 13 GT wing from Voltex japan, 1700mm is the width and is made in full carbon fiber. Will be testing it at the track soon.

audipwr1

May wanna add canards to front your balance will be funky

oldskews4

Der Jerman Kar sure haz alotta Nippon parts.

SignatureJames

Wow very aggressive. voltex has great quality stuff. We've done a few installs of these on some 997 GT3's.

Jay V

Too damn nice!!!!!

r6elmo

hard to tell from the photos but is that both taller and wider than the 997.1 cup wing?

RSRanger

Very nice looking wing. If my math is correct that's 67" wide.

Ranger

RSRanger

Tried to search it but not having much luck regarding this wing for a GT3/RS Porsche.
Is this just the wing and uprights? I assume it does not include the decklid.
Can you shed some info here.
Thanks much appreciated.

Ranger

John Chan

http://www.evasivemotorsports.com/mm...de=VOLTEX_WING

modoz61

Hi Ranger

A 997.2 RS decklid will work, or any 997 series cup decklid.

I run a full CF decklid based on 997.2 RS and its a great piece of work, I run cup upgrights and CF Anhedral wing

SignatureJames

I can't find the picture but we did a 997.2 GT3 with cup uprights and a voltex blade. I believe it was GT silver and if you google "gt3 voltex" it shows up. I believe evasive Motorsports built the car

gt380

The wing will work on any cup style decklid / upright for 996/997

gt380

its wider for sure, about 5"s or so

height is the same, as it uses factory cup uprights

gt380

you can order the decklid, upright, and wing all from Evasive Motorsports.. however Voltex sells just the air foil which will work for all cup style uprights / decklids

gt380

here you go!, this one is a type 4 1600mm on a .2 cup upright