FS: Brembo 380x34 Type III Slotted Front Rotors for 997.2 GT3 & GT3 RS
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Brembo Type III 380mm front rotors for sale. These are 2-piece discs, slotted, left and right. The thickness of the rotors is currently just a hair under 34mm, which means that they should have a good amount of life left. The hats are in great condition. These rotors will require special Brembo specific pad shapes (I don't have the pads).
These rotors came when I bought my (used) 997.2 GT3 RS, but were taken off as a part of CPO. I was told that they had 5-6 track days of use. The previous owner was running Pagid Yellows on them. (dealer threw them out and didn't give them to me).
Asking $1000USD (brand new these sell for $2800), and will be willing to ship at buyer's expense. Will take Paypal, but buyer will have to pay fees. These rotors are located in Niagara Falls, NY. Please PM me with any questions.
![Name: photo 1.jpg
Views: 3360
Size: 312.7 KB](https://rennlist.com/forums/attachments/997-gt2-gt3-forum/1012996d1453419124-fs-brembo-380x34-type-iii-slotted-front-rotors-for-997-2-gt3-and-gt3-rs-photo-1.jpg)
![Name: photo 2.jpg
Views: 3676
Size: 115.6 KB](https://rennlist.com/forums/attachments/997-gt2-gt3-forum/1012995d1453419124-fs-brembo-380x34-type-iii-slotted-front-rotors-for-997-2-gt3-and-gt3-rs-photo-2.jpg)
![Name: photo 3.jpg
Views: 3188
Size: 120.0 KB](https://rennlist.com/forums/attachments/997-gt2-gt3-forum/1012997d1453419124-fs-brembo-380x34-type-iii-slotted-front-rotors-for-997-2-gt3-and-gt3-rs-photo-3.jpg)
These rotors came when I bought my (used) 997.2 GT3 RS, but were taken off as a part of CPO. I was told that they had 5-6 track days of use. The previous owner was running Pagid Yellows on them. (dealer threw them out and didn't give them to me).
Asking $1000USD (brand new these sell for $2800), and will be willing to ship at buyer's expense. Will take Paypal, but buyer will have to pay fees. These rotors are located in Niagara Falls, NY. Please PM me with any questions.
![Name: photo 1.jpg
Views: 3360
Size: 312.7 KB](https://rennlist.com/forums/attachments/997-gt2-gt3-forum/1012996d1453419124-fs-brembo-380x34-type-iii-slotted-front-rotors-for-997-2-gt3-and-gt3-rs-photo-1.jpg)
![Name: photo 2.jpg
Views: 3676
Size: 115.6 KB](https://rennlist.com/forums/attachments/997-gt2-gt3-forum/1012995d1453419124-fs-brembo-380x34-type-iii-slotted-front-rotors-for-997-2-gt3-and-gt3-rs-photo-2.jpg)
![Name: photo 3.jpg
Views: 3188
Size: 120.0 KB](https://rennlist.com/forums/attachments/997-gt2-gt3-forum/1012997d1453419124-fs-brembo-380x34-type-iii-slotted-front-rotors-for-997-2-gt3-and-gt3-rs-photo-3.jpg)
![Name: photo 4.jpg
Views: 3307
Size: 108.3 KB](https://rennlist.com/forums/attachments/997-gt2-gt3-forum/1012998d1453419124-fs-brembo-380x34-type-iii-slotted-front-rotors-for-997-2-gt3-and-gt3-rs-photo-4.jpg)
#3
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
John - They will fit your RS with PCCB, these are really good rotors and look brand new. I run the same rotors.I should say the rotors look new, the hats look a little beat up around the floating hardware. i think a pad was used that didn't do as I stated below and was just kissing the hardware....
For pads you can run Race Technologies RE10, Endless pads should fit fine, so will PFC. The PFC I had to use a bench grinder on the backing plate on the inner radius, the pad material shape was fine. This took literally 5 minutes. The inner annulus on these is slightly narrower than stock rotors. Endless or RT pads should fit w/o modification.
For pads you can run Race Technologies RE10, Endless pads should fit fine, so will PFC. The PFC I had to use a bench grinder on the backing plate on the inner radius, the pad material shape was fine. This took literally 5 minutes. The inner annulus on these is slightly narrower than stock rotors. Endless or RT pads should fit w/o modification.
#6
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
John - They will fit your RS with PCCB, these are really good rotors and look brand new. I run the same rotors.I should say the rotors look new, the hats look a little beat up around the floating hardware. i think a pad was used that didn't do as I stated below and was just kissing the hardware....
For pads you can run Race Technologies RE10, Endless pads should fit fine, so will PFC. The PFC I had to use a bench grinder on the backing plate on the inner radius, the pad material shape was fine. This took literally 5 minutes. The inner annulus on these is slightly narrower than stock rotors. Endless or RT pads should fit w/o modification.
For pads you can run Race Technologies RE10, Endless pads should fit fine, so will PFC. The PFC I had to use a bench grinder on the backing plate on the inner radius, the pad material shape was fine. This took literally 5 minutes. The inner annulus on these is slightly narrower than stock rotors. Endless or RT pads should fit w/o modification.
Had to grind was PFC 0991. The difference between the 2 pads is
7819 covers a swept area of 60mm whereas the 0991 covers a swept area of 66mm.
__________________
Clark
ApexPerformance.net
Premier Racing Outfitters
Toll free: 866-505-2739
Direct: 843-299-0997
EM: chamerly@apexperformance.net
www.apexperformance.net
Save 10% on your next order over $75 on most items- enter Promocode Rennlist-10 on your next order or mention Rennlist during your phone order.
PCA Club Racing - National Sponsor
Clark
ApexPerformance.net
Premier Racing Outfitters
Toll free: 866-505-2739
Direct: 843-299-0997
EM: chamerly@apexperformance.net
www.apexperformance.net
Save 10% on your next order over $75 on most items- enter Promocode Rennlist-10 on your next order or mention Rennlist during your phone order.
PCA Club Racing - National Sponsor
#7
Former Vendor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Bump for a great upgrade. Just need to use 997 cup car front pads which have the right annulus with these discs.
Race Technologies (Brembo's partner) has the right street or track pads available to go with these discs.
Race Technologies (Brembo's partner) has the right street or track pads available to go with these discs.
Trending Topics
#8
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
yes they do work, but you lose some swept area of the pad
#9
#10
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Anyone can help verify the fitment for my 997.1RS?
I am getting two different info.
Sharwerk show the same part # but fvd shows two different # for the gen 1 &3.
Very confusing now!
I am getting two different info.
Sharwerk show the same part # but fvd shows two different # for the gen 1 &3.
Very confusing now!
#11
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The brembo part number for my .1 RS is 102.9009A. This is for a 380mm rotor for PCCB cars Porsche 2007-08 997 GT3, GT3RS and GT2.
Last edited by RobT 394; 01-22-2016 at 06:51 PM. Reason: add year
#12
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I know this is an apples to oranges thing, but my understanding is that the .1RS PCCB callipers will accept the steel rotors from a .2RS.
As an example, the AP racing rotor kit which is the same ring diameter and thickness as the Brembos uses the same part for both the .1RS PCCB and .2RS steel. See http://www.essexparts.com/essex-desi...7gt3iron-front. Consequently, I would assume the hat dimensions are the same, and this should apply to the Brembos as well. This is only my guess so you'll still need to do your homework.
As an example, the AP racing rotor kit which is the same ring diameter and thickness as the Brembos uses the same part for both the .1RS PCCB and .2RS steel. See http://www.essexparts.com/essex-desi...7gt3iron-front. Consequently, I would assume the hat dimensions are the same, and this should apply to the Brembos as well. This is only my guess so you'll still need to do your homework.
#13
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My guess, and it is a good one now that I think about it, is they will fit. The hats and rotors for my .1 RS fit my .2 cup perfectly. Unless there is something special about the street car due to the CL wheels; 380 mm rotors should be interchangeable. Same for the pads. Completely interchangeable.