Quick question - how to swap front spoiler
12-26-2014, 06:56 PM
#1
Quick question - how to swap front spoiler
Gents,
I would like to put a new factory front spoiler on my 997.2 GT3RS. I'm sure it is easier than it looks. I tried searching here, so forgive me if already posted.
I'd like to take my car to an event this weekend, and hate to bring it to the dealer if it is really easy. I have a spare spoiler on hand already.
Can someone kindly give this guy with two right hands some basic instructions, and let me know if it can be reasonably well done without putting car on the lift
(I have a car on my lift that can't move right now...)
Thanks in advance!
I would like to put a new factory front spoiler on my 997.2 GT3RS. I'm sure it is easier than it looks. I tried searching here, so forgive me if already posted.
I'd like to take my car to an event this weekend, and hate to bring it to the dealer if it is really easy. I have a spare spoiler on hand already.
Can someone kindly give this guy with two right hands some basic instructions, and let me know if it can be reasonably well done without putting car on the lift
(I have a car on my lift that can't move right now...)
Thanks in advance!
12-26-2014, 07:41 PM
#2
Rennlist Member
1. Remove the two lower screws near the tires on both pass and drivers side.
2. Gently pull away from the car (towards yourself) from left to right to undo the clips.
Takes 5 minutes. If replacing with the cup splitter you won't be able to use the two screws on the ends. The clips alone will be good enough.
2. Gently pull away from the car (towards yourself) from left to right to undo the clips.
Takes 5 minutes. If replacing with the cup splitter you won't be able to use the two screws on the ends. The clips alone will be good enough.
12-27-2014, 03:08 PM
#3
1. Remove the two lower screws near the tires on both pass and drivers side.
2. Gently pull away from the car (towards yourself) from left to right to undo the clips.
Takes 5 minutes. If replacing with the cup splitter you won't be able to use the two screws on the ends. The clips alone will be good enough.
2. Gently pull away from the car (towards yourself) from left to right to undo the clips.
Takes 5 minutes. If replacing with the cup splitter you won't be able to use the two screws on the ends. The clips alone will be good enough.