Notices
997 GT2/GT3 Forum 2005-2012
Sponsored by:
Sponsored by: Porsche North Houston

Ceramic rotors/hats/pads

Thread Tools
 
Search this Thread
 
Old 04-27-2014, 05:49 PM
  #1  
911GT3
Rennlist Member
Thread Starter
 
911GT3's Avatar
 
Join Date: Nov 2009
Location: KY
Posts: 785
Received 14 Likes on 12 Posts
Default Ceramic rotors/hats/pads

I have a set of rotors/hats/pads from my 2010 GT3 I am considering selling together. The car had 5,600 miles when I took them off, including 6 track days (3 DEs). I know they are valuable, but what is a reasonable value to list them if I do sell? What have people received for theirs compared to my mileage, etc.? I thought Rennlist first, then Ebay, as I know dealers and service shops check ebay regularly. Thanks for any help.
Old 04-27-2014, 11:36 PM
  #2  
GT3DE
Drifting
 
GT3DE's Avatar
 
Join Date: Jun 2011
Location: Arlington, VA, USA
Posts: 3,339
Received 53 Likes on 40 Posts
Default

They had lots of value until you used them for DE.
Street use = no wear.
Track use = wear them out fast.
If you had never taken them on track I would pay $6000 for them.
Unknown wear from track so price/value is unknown now.
I'll make an offer after seeing pictures of all sides of all rotors.
Post pictures here or email to BadDogRacing@gmail.com
Old 04-28-2014, 02:41 AM
  #3  
P.J.S.
Rennlist Member
 
P.J.S.'s Avatar
 
Join Date: Jun 2007
Location: Seattle, WA
Posts: 5,158
Received 2 Likes on 2 Posts
Default

I sold 3500 mile pccb with pads off a .1RS for $6250 shipped... Just as a reference point
My post included pics and rotor thickness measurements
Old 04-28-2014, 08:51 AM
  #4  
911GT3
Rennlist Member
Thread Starter
 
911GT3's Avatar
 
Join Date: Nov 2009
Location: KY
Posts: 785
Received 14 Likes on 12 Posts
Default

Originally Posted by P.J.S.
I sold 3500 mile pccb with pads off a .1RS for $6250 shipped... Just as a reference point
My post included pics and rotor thickness measurements
Did you have any track days on yours? Mine have 6, but it was when I first got the car, had never tracked, and was a beginner--not vary fast.

BTW, thank you for your post.
Old 04-28-2014, 08:58 AM
  #5  
tasman
Race Car
 
tasman's Avatar
 
Join Date: Jul 2005
Location: Appleton, WI
Posts: 3,634
Received 125 Likes on 87 Posts
Default

Need pics and rotor thickness and maybe even weights to get a better idea of this. Good luck.
Old 04-28-2014, 10:12 AM
  #6  
911GT3
Rennlist Member
Thread Starter
 
911GT3's Avatar
 
Join Date: Nov 2009
Location: KY
Posts: 785
Received 14 Likes on 12 Posts
Default

Originally Posted by tasman
Need pics and rotor thickness and maybe even weights to get a better idea of this. Good luck.
I will clean them up today, measure thicknesses, and get them online.
Old 04-28-2014, 11:10 AM
  #7  
P.J.S.
Rennlist Member
 
P.J.S.'s Avatar
 
Join Date: Jun 2007
Location: Seattle, WA
Posts: 5,158
Received 2 Likes on 2 Posts
Default

Originally Posted by 911GT3
Did you have any track days on yours? Mine have 6, but it was when I first got the car, had never tracked, and was a beginner--not vary fast.

BTW, thank you for your post.
I don't think they did have any track days on them but I bought the car used so can't say for sure
3500 mile car wit 0 over revs...

As you are planning, pics and measurements tell the story

a friend on RL had good luck selling his .2RS pccb on eBay after failed attempts on RL... But I say give RL first shot at them :-)

GLWS
Old 04-28-2014, 12:15 PM
  #8  
CS2CC6
Instructor
 
CS2CC6's Avatar
 
Join Date: Oct 2003
Location: SoCal
Posts: 111
Likes: 0
Received 0 Likes on 0 Posts
Default

They fit the .2RS?
Old 04-28-2014, 03:01 PM
  #9  
911GT3
Rennlist Member
Thread Starter
 
911GT3's Avatar
 
Join Date: Nov 2009
Location: KY
Posts: 785
Received 14 Likes on 12 Posts
Default

Originally Posted by CS2CC6
They fit the .2RS?
Not sure--part numbers are on them. My guess is yes. Someone on this forum will likely chime in.
Old 04-28-2014, 03:22 PM
  #10  
911GT3
Rennlist Member
Thread Starter
 
911GT3's Avatar
 
Join Date: Nov 2009
Location: KY
Posts: 785
Received 14 Likes on 12 Posts
Default

Will post in Classifieds today as well--best offer. If none reasonable, off to Ebay. I will be at Watkins Glen next week, and also have 4 beautiful OZ Superforgiattas, 19" CL. I sold my track set, these were my rain tires/wheels--used once. Pretty enough for street as is.

Name:  front 1.jpg
Views: 276
Size:  209.3 KB
Attached Images          
Old 04-28-2014, 07:17 PM
  #11  
GT3DE
Drifting
 
GT3DE's Avatar
 
Join Date: Jun 2011
Location: Arlington, VA, USA
Posts: 3,339
Received 53 Likes on 40 Posts
Default

997.1 and 997.2 are NOT same.
997.1 smaller than 997.2.
NOT interchangeable.
Old 04-28-2014, 07:20 PM
  #12  
GT3DE
Drifting
 
GT3DE's Avatar
 
Join Date: Jun 2011
Location: Arlington, VA, USA
Posts: 3,339
Received 53 Likes on 40 Posts
Default

As a beginner you would think you did not use them very much. Not true. You drove with nannies all on, did you not???? Computer does a lot of braking to assist you getting around the track - especially a beginner.
Looking at the pictures those have significant wear judging by the texturing and the wear circle showing.
I am buyer. Will PM you.
Thanks
Clarke

Last edited by GT3DE; 04-28-2014 at 10:49 PM.
Old 04-28-2014, 10:09 PM
  #13  
paver
Rennlist Member
 
paver's Avatar
 
Join Date: Jan 2007
Posts: 2,162
Received 17 Likes on 13 Posts
Default

Can somebody post pics of some that have zero trackdays?
Old 04-28-2014, 10:48 PM
  #14  
GT3DE
Drifting
 
GT3DE's Avatar
 
Join Date: Jun 2011
Location: Arlington, VA, USA
Posts: 3,339
Received 53 Likes on 40 Posts
Default

http://www.suncoastparts.com/product...e=2010gt3_pccb
Old 04-28-2014, 10:56 PM
  #15  
GT3DE
Drifting
 
GT3DE's Avatar
 
Join Date: Jun 2011
Location: Arlington, VA, USA
Posts: 3,339
Received 53 Likes on 40 Posts
Default

John - sent you email.


Quick Reply: Ceramic rotors/hats/pads



All times are GMT -3. The time now is 11:35 PM.