etchhead

Agree- might just low ball them to clear up space and score some OZs or Forgelines for track as well. My NT01s (235/315x18) are still in as new shape so could move those over. Read too many links that e new 305-35 are the route forward. Any reason why I don't smoke thorough my 315s first?

mooty

not sure about GT3, but on RS, 315 fks up psm/tc, it is not driveable.

etchhead

Thanks- will ditch the 315 and focus on 305-35

F1CrazyDriver

I will jack up the car form other side to see if it rubs... so far so good.

rijowysock

stock on gt3 is:
8.5+53
12+68

GT3RS
9+46
12+48

personally on a narrow body (non GT3) i have run:

9+45
12+56
(HRE C93)

(not a gt3, but same body)... 255 front, 325 rear







i just bought GT3RS oem size wheels for my GT3... and gonna see what i can manage with it...

bmwtye

What about when you actually drive it, does it rub over bumps, or if you are cornering hard? What camber are you running in the rear?

F1CrazyDriver

If the car clears with me jacking up the opposite end , to compress this side, i should be good. I will verify when i get brakes. Car has no brakes. Waitin on my irons i just ordered.

bmwtye

also what size tire are you running?

PhilMorrison

For reference, on my .2 GT3 I run:
Front 19x9" ET35 with 235 or 245/35/19 cups. -3 camber (top mounts spun)
Rear 19x12" ET50 with 305/30/19 cups. -1.8 camber.
I have no rubbing at all, but cut and folded my rear inner lip where it meets the rear bumper.

F1CrazyDriver

That looks stunning PhilMorrison.

I believe the forgeline's i got are 51 offset.
Correct me if i'm wrong mooty, but they were on a .2 RS correct ?


.1
8.5x19 ET 68 front
12x19 ET 63 w 5 mm spacer from factory / rear

.1RS
8.5x19 ET 53 front
12x19 ET 51 rear



.2
8.5 x 19 ET 53mm Front
12 X 19 ET 63mm Rear

.2 RS

9x19 ET47 front
12x19 ET51 rear

sterlingc1975

I know some one who just put some on narrow body today. Believe they are the orange Sharky wheels.

rijowysock

GORGEOUS DAMN CAR.. JESUS!

F1CrazyDriver

I jacked up opposite corner to give it max compression. I can fit a finger no problem.
My hats are different, not OEM tho.

Stefan Gäng

Hi can someone help me?

I saw a user to fit a 12x19 et50 wheel with cups 2 on a 997.2 gt3 with cut and folded inner fender lip in the rear.

Will the cutting and folding also clear a ATS GTR wheel in 12x19 et48 with trofeo r in 305/30 19? Camber, i am looking at something between -2.5 to -3.3 in the rear (haven't fully decided yet).

Thanks

Stefan

Stefan Gäng

Nobody, who tried this and can help me out/give some advice?