Notices
997 GT2/GT3 Forum 2005-2012
Sponsored by:
Sponsored by: Porsche North Houston

End of CPO checklist

Thread Tools
 
Search this Thread
 
Old 08-16-2013, 09:58 AM
  #1  
tscanlan
Advanced
Thread Starter
 
tscanlan's Avatar
 
Join Date: Dec 2011
Location: Asheville NC
Posts: 84
Received 0 Likes on 0 Posts
Default End of CPO checklist

As I near the end of the CPO for my 997.1, Does anyone have a short list of items I might want to ask the dealer to look into?
The car has been fantastic with no major issues.
Some things that have been replaced under CPO:
1. Synchro refresh @ gear2
2. Labor for LSD rebuild
3. Labor for LWFW
4. Micro-switch for passenger power window (that .5cm drop the window makes when door handle is engaged)
5. Headlight washer head replacement
Old 08-16-2013, 11:05 AM
  #2  
aero997c2s
Rennlist Member
 
aero997c2s's Avatar
 
Join Date: Dec 2009
Location: Virginia
Posts: 893
Likes: 0
Received 0 Likes on 0 Posts
Default

How did you get them to rebuild LSD? I figured the dealer would tell you it's fine and deny that it's "broken"
Old 08-16-2013, 11:13 AM
  #3  
tscanlan
Advanced
Thread Starter
 
tscanlan's Avatar
 
Join Date: Dec 2011
Location: Asheville NC
Posts: 84
Received 0 Likes on 0 Posts
Default

Originally Posted by aero997c2s
How did you get them to rebuild LSD? I figured the dealer would tell you it's fine and deny that it's "broken"
That reminds me, the dealer also replaced the RMS with the turbo RMS due to very light leakage. During the RMS (CPO) replacement, the LSD was examined and clutch pack was noted as "a goner"
RE: the LSD, the dealer did not rebuild for me, they simply removed it and gave to me. I had Goldcrest Motorsports (GA) rebuild with the Porsche Motorsports LSD. I then handed it over to the dealer and they installed it. The labor was covered under CPO.
Old 08-16-2013, 11:35 AM
  #4  
aero997c2s
Rennlist Member
 
aero997c2s's Avatar
 
Join Date: Dec 2009
Location: Virginia
Posts: 893
Likes: 0
Received 0 Likes on 0 Posts
Default

nice of them to leave your car on the lift while the work was being performed else where. ill have to try it at my dealership.
Old 08-16-2013, 11:37 AM
  #5  
tscanlan
Advanced
Thread Starter
 
tscanlan's Avatar
 
Join Date: Dec 2011
Location: Asheville NC
Posts: 84
Received 0 Likes on 0 Posts
Default

Coffee and bagels go a long way, as does a letter of complete satisfaction sent to service manager and those above.
Old 08-16-2013, 11:56 AM
  #6  
007DT
Drifting
 
007DT's Avatar
 
Join Date: Aug 2007
Location: Alpharetta, GA
Posts: 3,007
Received 47 Likes on 25 Posts
Default

Sounds like I need to bring my car to NC for Dealer work... Geez!
Old 08-16-2013, 01:39 PM
  #7  
chardonet
Racer
 
chardonet's Avatar
 
Join Date: Aug 2007
Location: Nordschleife
Posts: 470
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 007DT
Sounds like I need to bring my car to NC for Dealer work... Geez!



Quick Reply: End of CPO checklist



All times are GMT -3. The time now is 08:20 AM.