RSS front bump steer kit & LCAs now available
#1
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
RSS front bump steer kit & LCAs now available
Hey guys,
Many of you have purchased suspension components from us over the years so we wanted to introduce another part we've been using recently. This is the front adjustable toe / bump steer correction kit. The kit is designed for cars that have been lowered to correct the tie rod angle, which will be incorrect and limit travel if the tie rod is not parallel to the ground. The bump steer is adjustable using a sliding washer system.
These parts were designed with street use in mind, of all of the cars we've done with RSS components over the years, none have had the rattling noise or creeking sounds associated with monoball bushings since RSS uses the best quality ends and makes the parts in-house.
The price is $450 and it can be ordered directly from our site. We have a bit more on this item here:
http://www.sharkwerks.com/products.php?pid=332
These fit any 911 or 987 model.
For those that had been asking, we also have the RSS Tarmac series Lower control arms in stock again:
http://www.sharkwerks.com/products.php?pid=322
Many of you have purchased suspension components from us over the years so we wanted to introduce another part we've been using recently. This is the front adjustable toe / bump steer correction kit. The kit is designed for cars that have been lowered to correct the tie rod angle, which will be incorrect and limit travel if the tie rod is not parallel to the ground. The bump steer is adjustable using a sliding washer system.
These parts were designed with street use in mind, of all of the cars we've done with RSS components over the years, none have had the rattling noise or creeking sounds associated with monoball bushings since RSS uses the best quality ends and makes the parts in-house.
The price is $450 and it can be ordered directly from our site. We have a bit more on this item here:
http://www.sharkwerks.com/products.php?pid=332
These fit any 911 or 987 model.
For those that had been asking, we also have the RSS Tarmac series Lower control arms in stock again:
http://www.sharkwerks.com/products.php?pid=322
__________________
Dan Kennedy
SharkWerks: www.sharkwerks.com
Northern California's Porsche Performance, & authorized Evolution Motorsports, TechArt, HRE and Tubi, Cargraphic dealer and installation center
Phone: 510-651-0300
Email: dan@sharkwerks.com
SharkWerks' Latest Updates on Twitter
Dan Kennedy
SharkWerks: www.sharkwerks.com
Northern California's Porsche Performance, & authorized Evolution Motorsports, TechArt, HRE and Tubi, Cargraphic dealer and installation center
Phone: 510-651-0300
Email: dan@sharkwerks.com
SharkWerks' Latest Updates on Twitter
Last edited by Dan@SharkWerks; 04-27-2012 at 04:00 PM.