Source for 996 GT3 front rotors (slotted or cross drilled)
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Source for 996 GT3 front rotors (slotted or cross drilled)
I have a 06 Cayenne Turbo that needs front rotors.
I'm aware the Cayenne rotors fit the 996 GT3, so it should work the other way around.
Where do I find cross drilled or slotted affordable (relatively) rotors for the 996 GT3? My Cayenne does most of the braking with the front axle, and it serves my track day/autocross car towing needs, so good rotors are helpful.
Nice guy Craig (RennStore) already shipped me the RS29 pads for the CTT.
Thanks.
I'm aware the Cayenne rotors fit the 996 GT3, so it should work the other way around.
Where do I find cross drilled or slotted affordable (relatively) rotors for the 996 GT3? My Cayenne does most of the braking with the front axle, and it serves my track day/autocross car towing needs, so good rotors are helpful.
Nice guy Craig (RennStore) already shipped me the RS29 pads for the CTT.
Thanks.
#2
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
protosport at (973) 839-5353
or rick deman, he's a member here but i dont have his number.
both are slotted, about $600 $650/pair as of a year ago.
i have used many sets of both on 6gt3, no prob.
or rick deman, he's a member here but i dont have his number.
both are slotted, about $600 $650/pair as of a year ago.
i have used many sets of both on 6gt3, no prob.
#3
Rennlist Member
Rad,
I have been just running the plain rotors on the GT3 and getting them from Pelican.
http://www.pelicanparts.com/catalog/...BRKpad_pg2.htm
Peter
I have been just running the plain rotors on the GT3 and getting them from Pelican.
http://www.pelicanparts.com/catalog/...BRKpad_pg2.htm
Peter
#4
Rennlist Member
I do not think cross drilled rotors on pepper will last long at all with the sheer weight up front. There's a reason why a few guys run cayenne rotors or the like(ate) on 6gt3's because they last longer then cross drills and cheaper. Going to slotted/cross drills will
cost more and not last long esp cross drills. Now maybe if you're tracking the pig slotted with the right brake pad maybe worthwhile but even that is a reach. Mike
cost more and not last long esp cross drills. Now maybe if you're tracking the pig slotted with the right brake pad maybe worthwhile but even that is a reach. Mike