Premier 2011 GT2 RS Full Satin Guard Wrap + Moar!
#31
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
MOOTY - I bet BIG AL can and will do almost any installation given the $$$$$$$!!!!!!
You will also need Sam to put clear bras on your cars so no flying schrapnel will damage or dirty your track babies. :P
#32
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here you go, pictures were finally uploaded. Enjoy!!!! Again, this is what we did for this beautiful white 2011 GT2 RS:
1. Full Vehicle Satin Guard™: A revolutionary film with DualTone Technology built into its construction. Indoors, the clear satin protective film exhibits a satin matte finish while outdoors the metallic flakes show through.
FAQ:
Q: How is this different from the matte and "satin" vinyls?
A: The product is actually nearly as thick as traditional paint protection films (clear bra @ 8mils thick) while vinyls are only 1.5-2.5 mils
Q: How do you maintain it?
A: This product is actually easier to maintain and simplifies the entire process of cleaning and detailing the vehicle. No waxing or polishing, just wash. The product is also very resilient to chemical etching.
2. Diamond Cut IR - 94% IR rejection / 99.5% UV rejection. Shades available 73%, 63%, 50%, 33%
3. Escort 9500Ci TruStealth Installation - full custom stealth install. Look for the diffusers in the photos. Very difficult to spot.
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/5-1.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/6-1.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/7-1.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/8.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/9-1.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/10-1.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/11-1.jpg)
1. Full Vehicle Satin Guard™: A revolutionary film with DualTone Technology built into its construction. Indoors, the clear satin protective film exhibits a satin matte finish while outdoors the metallic flakes show through.
FAQ:
Q: How is this different from the matte and "satin" vinyls?
A: The product is actually nearly as thick as traditional paint protection films (clear bra @ 8mils thick) while vinyls are only 1.5-2.5 mils
Q: How do you maintain it?
A: This product is actually easier to maintain and simplifies the entire process of cleaning and detailing the vehicle. No waxing or polishing, just wash. The product is also very resilient to chemical etching.
2. Diamond Cut IR - 94% IR rejection / 99.5% UV rejection. Shades available 73%, 63%, 50%, 33%
3. Escort 9500Ci TruStealth Installation - full custom stealth install. Look for the diffusers in the photos. Very difficult to spot.
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/5-1.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/6-1.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/7-1.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/8.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/9-1.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/10-1.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/11-1.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/12.jpg)
__________________
PREMIER PROTECTIVE FILMS
ClearGuard PPF Specialists, Spectra PhotoSync IRD & CeraLuxe IRD, Authorized Modesta and Nanolex Dealer
www.facebook.com/premierprotectivefilms
B: 510-623-1308
sales@premiermobilegroup.com
See Our Projects! http://www.facebook.com/premierprotectivefilms
CLEAR BRA CLEANER -TRACK MARKS ON CLEAR BRA - PF1 TTR!
http://www.premiermobilegroup.com/pf1_products.shtml
PREMIER PROTECTIVE FILMS
ClearGuard PPF Specialists, Spectra PhotoSync IRD & CeraLuxe IRD, Authorized Modesta and Nanolex Dealer
www.facebook.com/premierprotectivefilms
B: 510-623-1308
sales@premiermobilegroup.com
See Our Projects! http://www.facebook.com/premierprotectivefilms
CLEAR BRA CLEANER -TRACK MARKS ON CLEAR BRA - PF1 TTR!
http://www.premiermobilegroup.com/pf1_products.shtml
#36
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Let's do this - More more more of our Satin Guard™ going on this stunning white 2011 GT2 RS (nope, not clear bra - Satin Guard™ Protective Films):
By the way, see if you guys can spot the Passport 9500Ci Laser Diffusers (yes, we did remove the front and rear bumper to get a flush mount of the radar detector and laser diffuser system). For the rear diffuser, we did not install the unit like most of the ones you would see on the market where it is just bolted on to the license plate frame screws. We installed it in a way that makes it integrated with the vehicle, yet would not interrupt the performance of this system
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/27.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/28.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/22.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/29.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/30.jpg)
By the way, see if you guys can spot the Passport 9500Ci Laser Diffusers (yes, we did remove the front and rear bumper to get a flush mount of the radar detector and laser diffuser system). For the rear diffuser, we did not install the unit like most of the ones you would see on the market where it is just bolted on to the license plate frame screws. We installed it in a way that makes it integrated with the vehicle, yet would not interrupt the performance of this system
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/27.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/28.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/22.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/29.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/30.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/31.jpg)
#40
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
BTW, TRAKCAR....we have one here that looks like yours....Satin Guard full vehicle on the roster for this RS:
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT3%20RS%20White%20Red%20Satin%20Guard/2.jpg)
#41
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes, mine was double and tripple wrapped but that creates more issues to stretch it enough.
My headlights windshield and mirrors are clear bra, much tougher stuff.
Plus it goes on hot, so flames near car, do you heat the material at all?
The white RS, wrapping Satin Guard over the decals? What about mirrors and spoiler? I left them clear to match wheels. You don't wrap wheels (yet) do you? LOL.
My headlights windshield and mirrors are clear bra, much tougher stuff.
Plus it goes on hot, so flames near car, do you heat the material at all?
The white RS, wrapping Satin Guard over the decals? What about mirrors and spoiler? I left them clear to match wheels. You don't wrap wheels (yet) do you? LOL.
#42
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes, mine was double and tripple wrapped but that creates more issues to stretch it enough.
My headlights windshield and mirrors are clear bra, much tougher stuff.
Plus it goes on hot, so flames near car, do you heat the material at all?
The white RS, wrapping Satin Guard over the decals? What about mirrors and spoiler? I left them clear to match wheels. You don't wrap wheels (yet) do you? LOL.
My headlights windshield and mirrors are clear bra, much tougher stuff.
Plus it goes on hot, so flames near car, do you heat the material at all?
The white RS, wrapping Satin Guard over the decals? What about mirrors and spoiler? I left them clear to match wheels. You don't wrap wheels (yet) do you? LOL.
As for the mirrors and the rear spoiler end caps, we will be applying clear bra over it. As for the decals, we remove them all and once the Satin Guard is complete, we will reapply a new set of decals as we print and cut them in house as well.
#44
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
#45
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Satin Guard™'s Dual Tone Technology (different sheen based on varying lighting is obvious in these photos). You can clearly see the satin white glowing in direct sunlight.
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/38.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/39.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/40.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/38.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/39.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/40.jpg)
![](http://i556.photobucket.com/albums/ss4/premiermobilegroup/2011%20GT2%20RS/41.jpg)