Sold; 997.2 GT3/RS Iron Rotors (380mm front, 350mm rear) for sale
02-11-2011, 12:29 PM
#1
Rennlist Member
Thread Starter
Join Date: Feb 2006
Location: Larkspur, CO
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Sold; 997.2 GT3/RS Iron Rotors (380mm front, 350mm rear) for sale
Last edited by mkozink; 03-07-2011 at 10:09 PM. Reason: Sold
02-11-2011, 02:02 PM
#2
Rennlist Member
I've had my hands on these rotors.
The rears are good as new and the fronts have the typical hairline crack like you see on the pics.
The spots are just material transfer, should be no problem with Pagid R29..
I already have a set of spares rotors front and rear. The rears will last a couple of years, but if you do not have a backup set yet, these would work
The rears are good as new and the fronts have the typical hairline crack like you see on the pics.
The spots are just material transfer, should be no problem with Pagid R29..
I already have a set of spares rotors front and rear. The rears will last a couple of years, but if you do not have a backup set yet, these would work
02-11-2011, 02:31 PM
#3
Rennlist Member
Thread Starter
Join Date: Feb 2006
Location: Larkspur, CO
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
I've had my hands on these rotors.
The rears are good as new and the fronts have the typical hairline crack like you see on the pics.
The spots are just material transfer, should be no problem with Pagid R29..
I already have a set of spares rotors front and rear. The rears will last a couple of years, but if you do not have a backup set yet, these would work
The rears are good as new and the fronts have the typical hairline crack like you see on the pics.
The spots are just material transfer, should be no problem with Pagid R29..
I already have a set of spares rotors front and rear. The rears will last a couple of years, but if you do not have a backup set yet, these would work
Peter- thanks for the kind words. One day I hope to lap Sebring in 2:20. Then I will only be 5 seconds slower than you!
