Track day pads for PCCB
#1
Track day pads for PCCB
Hello all ,
Just booked my first track day ( Anglesey U.K ) and i'm looking for advice on the best track day brake pads. Car is a 997 GT3 RS Generation 1 . Car has Carbon Ceramic discs. Not too botherd if they are noisey , just looking for good performance. Any sugestions.
Thanks in advance
Phil
Just booked my first track day ( Anglesey U.K ) and i'm looking for advice on the best track day brake pads. Car is a 997 GT3 RS Generation 1 . Car has Carbon Ceramic discs. Not too botherd if they are noisey , just looking for good performance. Any sugestions.
Thanks in advance
Phil
#3
If you are new to tracking, don't bother, just run your stock pads. After you wear those out, you can start to consider "track" pads. The OE pads are perfectly fine for beginning/intermediate drivers. Track pads need to come to temp in order to stop at 100% and I would hate to read about you driving through a corner because you forgot to get some heat in them
#4
Former Vendor
First lap or two they need heat - then pure bliss, such an improvement over stock pads in feel and longevity.
I have them in stock - fresh from Porsche Motorsports, and I can ship for about 48 bucks to the UK --
I have them in stock - fresh from Porsche Motorsports, and I can ship for about 48 bucks to the UK --