michael_mbsbrakes

We are happy to announce Performance Friction will be producing two piece full floating disc assemblies to replace the stock 997 PCCBs. The engineering department at Performance Friction is working on the final pricing and expected delivery time. Once set, we will be accepting pre-orders.

Thanks,

-Michael

Z06

Is this your true race rotors?

michael_mbsbrakes

These will be the dimpled rotors and the rears will accommodate the stock e-brake. By "race rotors" I assume you mean slotted. The metallurgy of the discs is the same. On PFC's brake dyno, the dimpled and slotted perform the same. The reason they use the slots for racing is a cleaning issue usually experienced during enduros.

Just an FYI, all PFC race pads are "degassed" at the factory so any thought of the slots being needed to channel gasses away is moot.

Thanks,

-Michael

Z06

What I mean by race rotors is the same thing that I saw on the Speed WC cars?

michael_mbsbrakes

The V2 floating 2 piece design is exactly the same. The only differences is dimples vs. slots as mentioned above, and the addition of anti-rattle spring/washers.

Thanks,

-Michael