For Sale: CCW C10 Wheels, Hoosier R6's, As New
10-23-2008, 04:04 PM
#1
Rennlist Member
Thread Starter
For Sale: CCW C10 Wheels, Hoosier R6's, As New
FOR SALE
997 GT3 Fitment
Almost New set of CCW C10 Wheels
Custom Silver Urethane finish. . . . they are GORGEOUS !!!
VERY E-Z Clean-up !!!
Both wheels for 997 GT3 off sets
2 - 18x9
2 - 18x12
Mounted with Hoosier R6 Tires, 245/35/18 and 315/30/18, only 6 gentle heat cycles.
Wheels are in fantastic condition, very clean.
SOLD. . . SOLD. . . SOLD
997 GT3 Fitment
Almost New set of CCW C10 Wheels
Custom Silver Urethane finish. . . . they are GORGEOUS !!!
VERY E-Z Clean-up !!!
Both wheels for 997 GT3 off sets
2 - 18x9
2 - 18x12
Mounted with Hoosier R6 Tires, 245/35/18 and 315/30/18, only 6 gentle heat cycles.
Wheels are in fantastic condition, very clean.
SOLD. . . SOLD. . . SOLD
Last edited by George3; 11-24-2008 at 10:35 PM.
10-23-2008, 07:59 PM
#3
Racer
Join Date: Feb 2008
Location: new jersery
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
hey george congrats on the sale of your car .did you pick out anything new.
i need another set to run the who's yer daddies for next season but i'm not sure to pull the trigger on thease i really want another set in black.maybe i can get them painted
i need another set to run the who's yer daddies for next season but i'm not sure to pull the trigger on thease i really want another set in black.maybe i can get them painted
10-23-2008, 08:07 PM
#4
Rennlist Member
Thread Starter
Stuart-
These wheels are literally brand new with only being on the track a few
times. The glossy silver urethane finish is a breeze to clean-up, too.
You know how I take care of my stuff. Have not found a replacement yet.
These wheels are literally brand new with only being on the track a few
times. The glossy silver urethane finish is a breeze to clean-up, too.
You know how I take care of my stuff. Have not found a replacement yet.
10-23-2008, 11:12 PM
#6
Rennlist Member
Thread Starter
10-24-2008, 03:27 AM
#7
Banned
Are yours a new design for the center? Yours look a little different than my C-14's. The face for the lug nuts on mine is flush, yours is recessed. What are the offsets? Mine are 53 front with a 63 rear (eliminates the spacers on the rear). I am just curious.
Trending Topics
10-24-2008, 10:38 AM
#9
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
C10 always had the recessed lug nut holes. while most C14's look like yours with flushed lug area. SOMETIMES CCW will build up the center of C14 (so the lug area are recessed) this way the C14 will hold center cap. though i see you devised another way to put center cap on it.
10-24-2008, 12:23 PM
#10
Racer
Given that these will fit on a 997 GT3, will these also fit on a 997 C2S? I ask because the tire widths (245 and 315) are wider than the stock C2S tires (235 and 295). Offsets on the stock C2S wheels are 57/67. What are the offsets on these? Thanks!
10-24-2008, 05:45 PM
#12
- for all you wheel offset experts, is a 50mm offset 9" rim equal to a 44mm offset 8.5" rimm
- i.e. you have 1/2 inch (12.5mm) that half of it (6.25mm) is offset to the outward side
- thus (50mm - 6.25mm) = 44mm offset equivalent
-i'm running a 51mm offset volk te37 which is already 2mm more outward offset than the stock (53mm) iirc
- thus is this 50mm 9" front rim - really a 44mm offset - thus actually 9mm further offset than the stock rim
- any idea if a 245 hoosier is actually not going to touch with this offset (if it doesn't it will be very close for sure but it will be clearly the maximum track possible)
paul
- i.e. you have 1/2 inch (12.5mm) that half of it (6.25mm) is offset to the outward side
- thus (50mm - 6.25mm) = 44mm offset equivalent
-i'm running a 51mm offset volk te37 which is already 2mm more outward offset than the stock (53mm) iirc
- thus is this 50mm 9" front rim - really a 44mm offset - thus actually 9mm further offset than the stock rim
- any idea if a 245 hoosier is actually not going to touch with this offset (if it doesn't it will be very close for sure but it will be clearly the maximum track possible)
paul
10-24-2008, 06:19 PM
#13
- for all you wheel offset experts, is a 50mm offset 9" rim equal to a 44mm offset 8.5" rimm
- i.e. you have 1/2 inch (12.5mm) that half of it (6.25mm) is offset to the outward side
- thus (50mm - 6.25mm) = 44mm offset equivalent
-i'm running a 51mm offset volk te37 which is already 2mm more outward offset than the stock (53mm) iirc
- thus is this 50mm 9" front rim - really a 44mm offset - thus actually 9mm further offset than the stock rim
- any idea if a 245 hoosier is actually not going to touch with this offset (if it doesn't it will be very close for sure but it will be clearly the maximum track possible)
paul
- i.e. you have 1/2 inch (12.5mm) that half of it (6.25mm) is offset to the outward side
- thus (50mm - 6.25mm) = 44mm offset equivalent
-i'm running a 51mm offset volk te37 which is already 2mm more outward offset than the stock (53mm) iirc
- thus is this 50mm 9" front rim - really a 44mm offset - thus actually 9mm further offset than the stock rim
- any idea if a 245 hoosier is actually not going to touch with this offset (if it doesn't it will be very close for sure but it will be clearly the maximum track possible)
paul
10-24-2008, 11:06 PM
#15
Instructor
Join Date: Dec 2004
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
They will definitely clear PCCBs, as I have the exact same wheels on my 997 GT3 with ceramics.
George3, I grew up in Bethlehem. Left after high school. How's the world up there? Seems strange that both Mack Truck and Beth Steel are gone.
George3, I grew up in Bethlehem. Left after high school. How's the world up there? Seems strange that both Mack Truck and Beth Steel are gone.