rafter75

I want to put a PORSCHE decal on the wing of my 997.2 GT3. Does anyone know if the one sold by Suncoast will work, or have a recommendation for one that will fit?

https://www.suncoastparts.com/product/SKU997RSWE.html

Thanks!

ngng

I bet you can find that for far less than $400

SR20Fastback

My assumption would be that the one for the RS would be too wide for the standard GT3 spoiler, but who knows

Wonderdan

This one was fine, no complaints…I’ll look it up as it has a slight curve

rafter75

That one looks amazing! Standing by to pick one up!

Wonderdan

lol I dunno it looks like I almost broke the bank on that mod

rafter75

Yikes! Yeah that may break the bank! Haha! Thanks for sending me the details.

bonehead

I got a decal for my 7.2 RS from the same seller as @Wonderdan. Applied it with the skilled helping hands of my then 9 year old daughter. $40. Can't beat it. Here's a link for you 7.2 GT3. http://www.acromann.com/product_info...gp3ablrcq9bmo3

rafter75

Thanks guys!! Just placed an order! You both saved me a lot of money. Owe you a beer.

jason95R

I love the look of these stickers and have often thought about one for my car. But I keep getting cold feet because I can't decide on color and I have a .1 GT3. For some reason I feel like on a .1 non-RS it's just going to look out of place and too modern. If that makes any sense. My car is currently white with black wheels and small black GT3 logos on the doors. So I think black would be the only color that works but afraid it's going to be be too much.

They look great on .2's and RS's.

rafter75

The decals are fairly cheap, if you don’t like it just take it off.

bweSteve

Thanks to Rafter for this thread, and thanks to the guys chiming in...

Dan,
it looks like you ordered & installed your sticker on your previous black 997.2 ... and by the looks of the placement, it doesn't squeeze right up against the wing end-plate-uprights. The "Standard" size selection on the Acromann website for that 997.2 GT3 says it is 41" wide (for the part number ACMRWD0010). I measured my .2 wing, and it has about a total of 43" of available length to put the sticker on. So 41" seems like it would be too long (to feel centered & appropriately sized for the available space).
I also measured the wing depth, which is 11". So now I'm also not only wondering which length you ordered, but also what the depth (width) ended up being, for that length (especially since the website doesn't seem to show the depth/width with each of the associated length choices).
Any additional advice on which length to choose?,... given the standard 41" seems long.
http://www.acromann.com/product_info...gp3ablrcq9bmo3

Ed, it looks like you purchased yours for your .2 RS, which is a different product part number (ACMRWD0006 - correction: ACMRWD0013). I don't have one of those wings to measure the available space, and compare against the product choices,.. but I do have a friend who might also be interested .... so "asking for a friend"

For $50, this is indeed something fun to play around with.
Subscribed

=Steve

bweSteve

Also, it looks like they are located in Hong Kong. How long from order to receipt did the shipping take?

bweSteve

Also quite a bit of discourse in this thread:
https://rennlist.com/forums/991-gt3-...-the-wing.html

... also other opinions on going with Renndecals, or designstuffonline in the UK

Other RL threads also mention Magnagrafix

bonehead

Steve
According to my invoice, I bought this one: http://www.acromann.com/product_info...oducts_id=4860

This was back in 2019, but I believe it took 1-2 weeks to get to the US.

This thread has got me thinking again about doing their full DTM livery on my E30 M3. The seller is very responsive to inquires, but the replies usually come overnight due to the time difference.