TypeRS

Hi RL,

Not sure if this has been covered. Tried to search with no good results.

Have a 997.2 RS with taller Salter Aero uprights and a oem cup lip.

Currently using a 991 RS car cover which is of course too large for the car and drags on the floor/wheels.

With my current setup I have two options:

-OEM 997 RS car cover (may stretch a bit to fit taller dimensions front and rear)

-Porsche Motorsport 997 GT3 Cup car cover. (May be a bit saggy in rear due to not having a cup wing)

Have any of you tried these options with these mods?

I could only find the part number for a 997.1 GT3 Cup, which I believe is narrow bodied. If someone has the part number for the widebody version that would be awesome.


Thanks!

ken

Elliotw44

I have an OEM 997.2 RS car cover and Salter aero I can give this a try and report back. Likely wont be until the weekend.

TypeRS

you are the man thank you!

Colorado964turbo

I have a Coverking Satin Stretch and it fits my 997.2 RS with some room to spare. It looks to be a bit more expensive than the Porsche one which is surprising.......

How much taller are your uprights? I can go see how much it stretches up if you want.

FLT6SPD

Baron uprights fit perfect in the factory indoor cover. Are Salter's taller?

ngng

I think you are limited by the wing shape and not the uprights.

Coop

The 997 Cup Car cover is perfect for all 997.2 GT3 RS;

https://www.fvd.net/us-en/9977210509...otorsport.html

Elliotw44

Tested today. The indoor cover fits over salter aero even with the bigger 4.0 end plates and 4.0 canards in front.

TypeRS

Thanks all! I will go for the oem indoor RS cover. Looks like there is enough stretch.

the Salter uprights are of similar dimensions to the baron uprights. If i recall only an inch or two taller than stock.