? Cost effecient way to replace PCCB rotors on a .2 GT3RS ?
#16
Rennlist Member
Question for the Racing Brake guys. Is your use of 'continuous fibers' similar to what other top suppliers are now doing? If so, are your rotors also re-surfacable a few times for their lifespan? Thanks!
https://racingbrake.com/por-crk-11
Front 350x34mm
Rear: 350x28mm
Back view showing the drum brake with iron liner retain the OE emergency brake.
Front 350x34mm
Rear: 350x28mm
Back view showing the drum brake with iron liner retain the OE emergency brake.
#17
Former Vendor
But not for those made with continuous (long) woven carbon fiber.
CCM Rotor with carbon fabric texture (Surface is actually very smooth.)
Those chipped and crack pics on Brembo rotors are solely for illustrating the strength from different rotor material and mfg process.[/QUOTE]
RB CCM rotors are Gen 4 - The most durable and coolest discs ever made available.
These rotors are going to last and last even for track applications, but also re-furbishable as needed.
Last edited by RacingBrake; 07-19-2021 at 05:28 PM.
#18
Burning Brakes
Just to follow up on this thread, I was able to uncrate the rotors I got from FLT6SP and they are exactly as described. He was great to work with and set up the shipping, I would not hesitate buying something from him again..... Not rotors though, these will be my like new spare set.
Bill
Bill
The following users liked this post:
FLT6SPD (07-29-2021)