waizone

I need the 17 mm nut, washer and third item shown on the photo to mount the Porsche seat belt to the seat. My parts guy sent me the attached diagram but we can't figure out if the part if is shown.

Bxstr

I think the two diagrams he sent you are for different seats. One is for the folding bucket seat, the other is for the ROW Euro GT3 seat (which is similar to the CGT seat). Which one do you have?

Bxstr

I think you're going to want parts 18-21.

waizone

I have the folding buckets and what you sent looks like it! Thank you very much Bxstr. Love this forum.

Bxstr

For some reason, they're still showing the Euro ROW Buckets in that picture, but it's the only diagram I could find which contains the seat belt in there. So those should be the correct parts.

waizone

I'm going to have my parts guy pull the diagram for the boxster spyder as I believe the spacer sleeve fits directly into the seat (no washer as shown). It came with a large washer (which I'm using on the hexagon 17mm bolt) but no spring washer. Take a look at the parts in my post. Perhaps I'm missing the spring washer?

Bxstr

Here's the diagram for the GT3.

https://nemigaparts.com/cat_spares/p...2/529u/812000/

Here's the diagram for the 987 Spyder.

https://nemigaparts.com/cat_spares/p...2/533u/812000/