Canards
#2
Drifting
Been there already. I tried Gert at Carnewal to no avail as well. Porsche themselves are out and I believe these will fall into the category of who knows when they will be back if ever. I have a set of the 4.0 composite copy dive planes from FVD and I personally don't think they are finished as nice as the carbon pieces from Porsche. They are the exact shape and made from the same mold for sure they just don't have the same finish work and sharpness (a little wavy). If you find some factory ones I am in. But I looked hi and low..
#3
Rennlist Member
Thread Starter
Been there already. I tried Gert at Carnewal to no avail as well. Porsche themselves are out and I believe these will fall into the category of who knows when they will be back if ever. I have a set of the 4.0 composite copy dive planes from FVD and I personally don't think they are finished as nice as the carbon pieces from Porsche. They are the exact shape and made from the same mold for sure they just don't have the same finish work and sharpness (a little wavy). If you find some factory ones I am in. But I looked hi and low..
#4
Drifting
I’ll try to get a pic up for you..
#7
Drifting
Hi Ray,
I looked into them as well, here is the link to the 997 GT3 piece that Demon Speed makes:
https://www.demonspeedmotorsports.co...diveplanes.htm
These are 997 GT3 only, not RS, which I am told has a different shape fascia and leaves a gap. They told me they would possibly look into making them. Never heard back..
I looked into them as well, here is the link to the 997 GT3 piece that Demon Speed makes:
https://www.demonspeedmotorsports.co...diveplanes.htm
These are 997 GT3 only, not RS, which I am told has a different shape fascia and leaves a gap. They told me they would possibly look into making them. Never heard back..
Trending Topics
#9
Drifting
I was told by a woman at Demonspeed she would forward to Joe. Do you know how to reach him directly? I’d put in the effort to see if there is enough interest to make it worth Joe’s time...
#10
RL Community Team
Rennlist Member
Rennlist Member
#11
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Good morning all. I have forwarded this link to Joe. I am sure he will either post here or provide me feedback.
I will guess that the issue is not that he is not interested in making them. Or that he feels that the market is not large enough to make a mold financially feasible.
The issue is going to be more about having a car to work with. Joe would need to have a GT3 RS at his shop or local to him to create the pattern.
Thanks
Ed
I will guess that the issue is not that he is not interested in making them. Or that he feels that the market is not large enough to make a mold financially feasible.
The issue is going to be more about having a car to work with. Joe would need to have a GT3 RS at his shop or local to him to create the pattern.
Thanks
Ed
__________________
https://demonspeed.com/
Engineered Race and Track Products for your Porsche
https://www.goodaero.com/
Race Designed Aerodynamics
https://racingtirewarmers.com/
Win more races with tire warmers
Great products for racers by racers
ed@demonspeed.com
Demon Speed Motorsports is a proud sponsor of PCA and the Club Racing Program
https://demonspeed.com/
Engineered Race and Track Products for your Porsche
https://www.goodaero.com/
Race Designed Aerodynamics
https://racingtirewarmers.com/
Win more races with tire warmers
Great products for racers by racers
ed@demonspeed.com
Demon Speed Motorsports is a proud sponsor of PCA and the Club Racing Program
#12
Drifting
Good morning all. I have forwarded this link to Joe. I am sure he will either post here or provide me feedback.
I will guess that the issue is not that he is not interested in making them. Or that he feels that the market is not large enough to make a mold financially feasible.
The issue is going to be more about having a car to work with. Joe would need to have a GT3 RS at his shop or local to him to create the pattern.
Thanks
Ed
I will guess that the issue is not that he is not interested in making them. Or that he feels that the market is not large enough to make a mold financially feasible.
The issue is going to be more about having a car to work with. Joe would need to have a GT3 RS at his shop or local to him to create the pattern.
Thanks
Ed