Rennlist - Porsche Discussion Forums

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)
-   997 GT2/GT3 Forum (https://rennlist.com/forums/997-gt2-gt3-forum-141/)
-   -   GT3 Upper Grill Frame (https://rennlist.com/forums/997-gt2-gt3-forum/1134463-gt3-upper-grill-frame.html)

Hi-Arc 03-19-2019 07:02 PM
GT3 Upper Grill Frame
 

https://cimg3.ibsrv.net/gimg/rennlis...872d7ca92.jpeg
How is the mesh grill frame held into position on the 997.2 GT3 upper radiator vent? Suncoast suggested part number 99757556792 frame but there is nothing to hold into position on bumper

paver 03-19-2019 08:44 PM
There are two pieces of plastic that are stuck to the bumper cover with double-sided foam tape. 997 575 567 92 sandwiches the mesh to those two pieces. If they have a part number on them it can't be seen w/o pulling them off the bumper cover. Maybe that means they are included wth 997 575 567 92 but that's just a guess. A quick google doesn't show that to be likely though. The parts catalog I have is not much help.

MJSpeed 03-19-2019 09:19 PM
The part number is correct as per PET. However, it is limited to info, so I'm not sure about the foam being there.

Hi-Arc 03-20-2019 09:26 AM

https://cimg2.ibsrv.net/gimg/rennlis...cfa476675f.png
Thanks for the reply. Looks like I need part number 3 in photo then, correct? I have part number 35

MJSpeed 03-20-2019 10:44 AM
No, because you have 7.2 GT3 bumper. Part number 3 is for .1 bumpers.

Hi-Arc 03-20-2019 12:16 PM
I thought it might be needed underneath on the 997.2 bumper.

FLT6SPD 03-20-2019 12:19 PM
You need #35 for .2

Originally Posted by Hi-Arc (Post 15715986)

https://cimg2.ibsrv.net/gimg/rennlis...cfa476675f.png
Thanks for the reply. Looks like I need part number 3 in photo then, correct? I have part number 35

paver 03-20-2019 01:02 PM
Originally Posted by Hi-Arc (Post 15716316)
I thought it might be needed underneath on the 997.2 bumper.
you need a part that is not shown in that diagram. It's two pieces and they are stuck to the underside of the bumper cover with double-sided foam tape. Part #35 screws into the two pieces I'm talking about with about 30 little T10 screws. Do you already have a bumper cover?

Hi-Arc 03-20-2019 02:21 PM
Ok thanks. Yes that’s my bumper shown in photo

paver 03-21-2019 04:26 PM
Hi-Arc, I'm almost positive this is the part you need....the problem is I searched that part number on Suncoast's and other oem parts sites and nothing comes up. Maybe the part number has been superseded and all it takes is a phone call though.


https://cimg4.ibsrv.net/gimg/rennlis...9a38dc5c21.png

Hi-Arc 03-22-2019 08:22 PM
Thanks so much for your response. Suncoast was not able to locate the part number. I will forward your info. That’s for sure what I am missing

grey2011s 02-25-2020 01:31 PM
Does anyone know the part number for the mesh grill that goes on the smile vent?


All times are GMT -3. The time now is 03:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands