Anyone need 997 GT3 track parts? cup car wing/trunk and forgeline wheels
#1
Anyone need 997 GT3 track parts? cup car wing/trunk and forgeline wheels
I have a set of forgeline GS1R track wheels for 997.1 GT3 (NB) fresh powder coat in black (were red before) $3000
I also have a PMNA trunk/wing, completely OEM (real) This is over $10,000 new, i bought it new and assembled it. It has seen 2 track days and 200 miles of street driving. It is still raw white gel coat and carbon fiber, with a black and carbon fiber vinyl wrap. $4500
I also have a PMNA trunk/wing, completely OEM (real) This is over $10,000 new, i bought it new and assembled it. It has seen 2 track days and 200 miles of street driving. It is still raw white gel coat and carbon fiber, with a black and carbon fiber vinyl wrap. $4500
#2
Nice! I think that's my old set up! Looks great. Would you consider selling the wing separately?? Josh PS BTW if it is my old setup the seller is absolutely legit. It is 100% POMO/PMNA down to the hardware and he purchased it from me new. Just want to give props to a good dude.
#4
Rennlist Member
#6
Nice! I think that's my old set up! Looks great. Would you consider selling the wing separately?? Josh PS BTW if it is my old setup the seller is absolutely legit. It is 100% POMO/PMNA down to the hardware and he purchased it from me new. Just want to give props to a good dude.
Thanks josh!
#7
GS1R 18 X 9 5 X 130 CB 71.6 ET 50
GS1R 18x12 DEEP 5 X 130 CB 71.6 ET 59
I was using 255/315 Toyo R888's, which have 2 days on them.. I could include them with the sale for another 100 (what it would cost me to mount them back up?)
Trending Topics
#8
It's actually an E46 Wagon with a S85 swap. I will probably list it on Bring A trailer in the next month or so, keep an eye out for it there.
#11
i have over 75k into it. it's embarrassing to type that out... the S85 is a very very expensive motor to get working correctly. This car also has every part imaginable. It's an E46 M3 with with a wagon body on it, has complete front and rear M3 subframes/diff/brakes/control arms, etc. I will probably set the reserve at 25, I expect it to bring 30-35k.
#12
Rennlist Member
i have over 75k into it. it's embarrassing to type that out... the S85 is a very very expensive motor to get working correctly. This car also has every part imaginable. It's an E46 M3 with with a wagon body on it, has complete front and rear M3 subframes/diff/brakes/control arms, etc. I will probably set the reserve at 25, I expect it to bring 30-35k.
#13
Anyone need the decklid/end plates/ uprights and intake? I'm interested in the wing. Please let me know. If so I'll buy everything and we can do a deal. Ryan doesn't want to part Best Josh Please PM. Thanks.
#14
Same story with anyone that sells something like this. The journey and excitement was building it.... Honestly it took so long to get going I moved on to other cars...The S85 motor is HIGHLY complex... You could not expect to just bolt the engine in and go. There is a TON of fab work that goes into putting a V10 into an engine bay where it does not belong. I also don't have room to keep it at my place, so it stays in storage at a friends garage (with his collection) about 45 minutes from my house.
Long story short, someone else will get a S85 V10 powered E46 touring for far less than half what it would cost to build, and in reality, probably less than the car is worth in straight parts.... But i'm not the first to lose money on a car.
#15
Come on Josh, you know it's a smoking deal on this wing, just think of it as an investment