FS Intrax 4 Way Coilovers GT3 997
#1
Pro
Thread Starter
FS Intrax 4 Way Coilovers GT3 997
I purchased these from a forum member Link to Post.
I'm looking to get $2,000 shipped in the 48 states. Reasonable offers welcome - this setup is about $9K new
SOLD
Intrax Link
I'm trying to sell as I want to use the funds to put into my E46 M3 as a track car. Please PM if interested. Thank You.
Located in San Jose CA
Additional Information:
Does it need a rebuild? I can't say for certain, if you're going to use for street it's probably fine, but if you want the most out of this system, I would do a rebuild. You can send to Intrax direct and they will do for 175euro per damper. Personally I was just going to install them as they sat.
Condition? When they were shipped to me one stud was severely bent, i've seen cut and uninstalled it. You would need to find an additial stud to install. Also one of the bronze rods that you use to adjust on top was also bent (see photos)
Below was the original post information:
Selling a kit of Intrax Racing 4-way Coilovers (Comparable/exceeds quality/performance to JRZ/Moton). Dampening and spring rates tuned specifically for GT3 street/track.
This is the exact kit that traded hands from forum members Savyboy to 1Gunner. I bought 1Gunner's 997.1 GT3 two years ago and reverted to stock suspension. Kit has been in my garage since.
Asking $2,000.
See related threads below.
https://rennlist.com/forums/997-gt2-...ml#post9210389
https://rennlist.com/forums/997-gt2-...uspension.html
I'm looking to get $2,000 shipped in the 48 states. Reasonable offers welcome - this setup is about $9K new
SOLD
Intrax Link
I'm trying to sell as I want to use the funds to put into my E46 M3 as a track car. Please PM if interested. Thank You.
Located in San Jose CA
Additional Information:
Does it need a rebuild? I can't say for certain, if you're going to use for street it's probably fine, but if you want the most out of this system, I would do a rebuild. You can send to Intrax direct and they will do for 175euro per damper. Personally I was just going to install them as they sat.
Condition? When they were shipped to me one stud was severely bent, i've seen cut and uninstalled it. You would need to find an additial stud to install. Also one of the bronze rods that you use to adjust on top was also bent (see photos)
Below was the original post information:
Selling a kit of Intrax Racing 4-way Coilovers (Comparable/exceeds quality/performance to JRZ/Moton). Dampening and spring rates tuned specifically for GT3 street/track.
This is the exact kit that traded hands from forum members Savyboy to 1Gunner. I bought 1Gunner's 997.1 GT3 two years ago and reverted to stock suspension. Kit has been in my garage since.
See related threads below.
https://rennlist.com/forums/997-gt2-...ml#post9210389
https://rennlist.com/forums/997-gt2-...uspension.html
Last edited by r6elmo; 04-24-2020 at 06:04 PM.
#4
Rennlist Member
Bump for an awesome suspension. I run these on my GT3 as well. GLWS