SF Bay Area: Need exhaust tips
08-31-2017, 04:31 PM
#1
Burning Brakes
Thread Starter
SF Bay Area: Need exhaust tips
any Bay Area RLers have some exhaust tips i can buy/borrow?
One of mine decided to show why Titanium isn't necessarily the best choice by falling off while driving to work this morning. The Ti had cracked around where the tip attaches to the plate part.
Have some Shark Werks tips on order (thank Alex for the email convo today!), but they are currently out of stock and may be 2-3 weeks to get them.
One of mine decided to show why Titanium isn't necessarily the best choice by falling off while driving to work this morning. The Ti had cracked around where the tip attaches to the plate part.
Have some Shark Werks tips on order (thank Alex for the email convo today!), but they are currently out of stock and may be 2-3 weeks to get them.
08-31-2017, 05:01 PM
#2
Rennlist Member
I have a set of larger oem 991 tips or 997 you can borrow either, but I am headed out of town sat morning.
08-31-2017, 05:19 PM
#3
Burning Brakes
Thread Starter
cool! the regular 997 ones would be more than fine!
just not sure if i can get up to Livermore before saturday...
though might be good excuse to drive Mines Rd to avoid traffic.
will you be back in town next week?
just not sure if i can get up to Livermore before saturday...
though might be good excuse to drive Mines Rd to avoid traffic.
will you be back in town next week?
08-31-2017, 05:30 PM
#4
Rennlist Member
will be here next week (monday as well)
08-31-2017, 06:52 PM
#7
i have these 4" tips you can have welded onto the exhaust. stainless and double walled.
100$ shipped usa pyapl add paypal fees or gift it. 3" at the inlet 4" at the outlet brand new never installed
100$ shipped usa pyapl add paypal fees or gift it. 3" at the inlet 4" at the outlet brand new never installed
Trending Topics
08-31-2017, 06:54 PM
#8
Rennlist Member
who made those TI tips? i've 3.5 years of use on the set BBI made out of TI on mine and not a single issue
Don't blame the material, blame the fab...
I have a set of tips but in SoCal... if you don't come up with anything PM me.
Don't blame the material, blame the fab...
I have a set of tips but in SoCal... if you don't come up with anything PM me.
08-31-2017, 07:23 PM
#9
Burning Brakes
Thread Starter
not sure which tips these are as they were on the car when i bought it.
i'll see if there are any markings in them when i remove.
and to be fair, car has just over 40k miles now, so these likely had a lot of miles on them.
i'll see if there are any markings in them when i remove.
and to be fair, car has just over 40k miles now, so these likely had a lot of miles on them.
10-30-2017, 07:51 PM
#10
Burning Brakes
Thread Starter
finally got the Shark Werks 88mm tips for the car and popped them on this weekend.
Thanks to FLT6SPD for letting me borrow some stock tips for longer than I expected.
And thanks to the Shark Werks crew for making these nice tips that go well with the Shark Werks center section.
Before...
Comparison...
After...
Thanks to FLT6SPD for letting me borrow some stock tips for longer than I expected.
And thanks to the Shark Werks crew for making these nice tips that go well with the Shark Werks center section.
Before...
Comparison...
After...
11-01-2017, 02:08 PM
#11
Nordschleife Master
yes - cannot do without the Sharky tips, got mine last week, they are imperative (compared to OEM tips)
11-01-2017, 02:54 PM
#12
Burning Brakes
Thread Starter
haha. i actually quite liked the titanium ones that were on the car when I bought it. the way they blued over time looked nice with the Aqua paint. just wasn't willing to pay $1500 for the Porsche Ti exhaust tips and wasn't sure of quality of the Power Agency ones that seemed to pop up in all my searches.