template wanted
#2
Racer
The .1 is the same at the 997.2 GT3, that is, moulded into the decklid.
but the 997.2 GT3RS has cup like uprights.
#3
Rennlist Member
If it is for a .2RS the mounting points are offset from one another and is also non-linear from top to bottom. A 2D paper template will not get you there.
#4
Rennlist Member
Exactly that. Plenty have tried in the early days only to realize it's truly a 3D object, unlike the old (996/997.1) Cup wing uprights which are plain 2D.