Build sheet - window sticker
#3
Addict
Rennlist Member
Rennlist Member
Any idea what the cost is? Went to their "Get Started" page, and you have to provide a lot of info. Before doing that, I'd like some idea of cost.
(ed: found info at https://rennlist.com/forums/993-forum/931556-new-sponsor-reproduction-window-stickers.html)
(ed: found info at https://rennlist.com/forums/993-forum/931556-new-sponsor-reproduction-window-stickers.html)
Last edited by ltcjmramos; 06-29-2017 at 11:27 AM.
#4
Burning Brakes
You can get a build sheet easily, right now
Step 1- find your VIN
Step 2- paste this URL in your browser: https://admin.porschedealer.com/repo...print.php?vin=
Step 3- paste your VIN in right after the URL you pasted above
Step 4- hit enter
Then you should see your build info, example below
Step 1- find your VIN
Step 2- paste this URL in your browser: https://admin.porschedealer.com/repo...print.php?vin=
Step 3- paste your VIN in right after the URL you pasted above
Step 4- hit enter
Then you should see your build info, example below
#5
Rennlist Member
You can get a build sheet easily, right now
Step 1- find your VIN
Step 2- paste this URL in your browser: https://admin.porschedealer.com/repo...print.php?vin=
Step 3- paste your VIN in right after the URL you pasted above
Step 4- hit enter
Then you should see your build info, example below
Step 1- find your VIN
Step 2- paste this URL in your browser: https://admin.porschedealer.com/repo...print.php?vin=
Step 3- paste your VIN in right after the URL you pasted above
Step 4- hit enter
Then you should see your build info, example below
Trending Topics
#8
Instructor
I used Stuttgartstudios and was impressed with the outcome. They took time and sent preview copies prior to final printing. I went ahead and had them mount it also. Except for the fine print on the back of the frame saying this was a copy of the original, I don't think anyone could tell. I don't recall the exact price but printed, mounted and shipped was right around $200 as I recall.
#9
You can get a build sheet easily, right now
Step 1- find your VIN
Step 2- paste this URL in your browser: https://admin.porschedealer.com/repo...print.php?vin=
Step 3- paste your VIN in right after the URL you pasted above
Step 4- hit enter
Then you should see your build info, example below
Step 1- find your VIN
Step 2- paste this URL in your browser: https://admin.porschedealer.com/repo...print.php?vin=
Step 3- paste your VIN in right after the URL you pasted above
Step 4- hit enter
Then you should see your build info, example below
#10
Rennlist Member
#11
Three Wheelin'
You’d have to go through a third party to get an unofficial copy of the Monroney (sticker). It (the sticker) is subject to federal regulations and I’m pretty sure you can’t just walk into a dealership and ask for one. It isn’t that they can’t print one up, but more than likely the law does not allow them to. It seems to me that if a person was adept in using graphics software and could copy, or closely copy, the fonts, spacing, and coloration, and had the appropriate printing hardware, that it would not be too difficult to reproduce a sticker. Paying around $200 seems like a pretty fair price for utilizing someone else’s expertise and equipment for such a reproduction.
#13
Rennlist Member
#14
I used Stuttgartstudios and was impressed with the outcome. They took time and sent preview copies prior to final printing. I went ahead and had them mount it also. Except for the fine print on the back of the frame saying this was a copy of the original, I don't think anyone could tell. I don't recall the exact price but printed, mounted and shipped was right around $200 as I recall.