Frank996

Hi All,

I have now had my 997.2 C4S PDK for 3 days and what a difference compared to my, now sold, 996 C4S Manual. So far I have just been driving around (with a huge grin on my face) not paying attention to anything but the sound and the feel of the car, until today when I decided to check things out in detail.

So,

First Question: I cannot find anywhere what option C07 means from the options list sticker found in the service book. Anyone knows? UPDATE: C07 means sold in Italy

Second Question: I have the sport chrono plus pack but I cannot for the life of me find the option on the main screen. In all fairness, I didn't activate/press either of the Sport or Sport Plus buttons so maybe this is why? Anyone?

Bonus questions:

1) For some strange reason the original owner did not chose to have cruise control fitted from the factory. Is this possible to have retro-fitted by Porsche and what would such a job cost (even if you have an US price it gives me a guide at least).

2) The garage door opening option is also an option I would consider having added. Same as above, something Porsche can retro-fit and what would it set me back (again US pricing fine as a guidance for me)?

3) I have the basic steering wheel (option code 841). What would the extended option command steering wheel set me back and is it retro-fittable (my PCM 3.0 is loaded with all options possible (DVD, Navigation, Bluetooth, Phone, Multi aux interface etc)? Is it worth it?

docdrs

Press the buttons , you will see it on your wheel spokes, sport / sport plus and maybe the dash somewhere, cant recallif on the dash

Frank996

Sorry docdrs, but I don't understand a word of what you're trying to tell me???

docdrs

Press the sport or sport plus button on the console

Frank996

Ok got it... Will try it tomorrow... thanks!

Anyone have anything to share on my other points?

ltcjmramos

Cruise control can be retrofitted. I had it done on my ex-6GT3. I'll see if I can find my posting on it.

Found it. Here's what I wrote. But, please note, this was for a 996
Got the retrofit done at the dealer where I had bought the car a couple of years ago. From the repair order:

Parts:
1 996-613-219-10-EWC, Column switch assy
1 PNA-721-043-00-040, Repair set K - #9600
2 PNA-721-043-00-063, Repair set 03 - #960
10 999-513-007-40, Tie-wraps ($2.45 ea!!!, what a crock!!)
1 PNA-721-043-00-122, Electrical housing #960122
$343 in parts, $225 in labor

NOTES: Installed column switch, and fabricated wiring harness. Coded and verified operations

Frank996

Thanks ltcjmramos