When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I made mine from Lowe's gutter protector material, some black edging, superstrong double-sided trim tape, and modeling 3/16 inch plastic hollow bar for mounting (pieces of the bar were placed to act like cleats/brackets) . No holes were drilled in the bumper cover. I had a preference for mounting on the outside of the divider bar. I did not have to remove the bumper cover but have done so since to clean the evap coils and radiators and it's really not a big deal. In the end, they weren't has "dirty" as I thought they might be and their new cleanliness didn't help lower the oil temps in really high ambient temps.
Blassy, LongIslander - what made you choose the Zunnsport over the Rennline? Was it the bumper removal? The Zunnsport seems to be quite a bit more expensive, even with the 15% off code...
Exactly. I didnt see the need to remove a bumper. And if I have to get in there again I can just take them off, not remove the bumper over and over.
Good clean product, perfect curves in the metal. Get em.