Getty ductail for Canadian...
#32
1 - 997 ducktail sport. $1369
Wiring harness. $179
Primer service. $160
FEDEX. $188
Total $1896.00 USD normal
Group price $1628.00 USD
+ 194CDN for Duty/HST.
#33
Thank you Neb, any idea how long this price is good?
Also, for anyone that has done the Getty wing and paid for the primer service...did the paint shop that did your final paint and fit feel like the priming service was done well (or poor) by Getty?
Also, for anyone that has done the Getty wing and paid for the primer service...did the paint shop that did your final paint and fit feel like the priming service was done well (or poor) by Getty?
#34
He didn't give me a timeline, as long as there is an order of 3 or more that price will hold.
#36
#37
Three Wheelin'
I just ordered the Getty Sport Ducktail earlier this week....worked a pretty good deal with them.
Due to arrive next Tuesday....then off to the body shop for paint install. I also opted for the primer and wire harness. Just a note, ask your body shop if getting it primed by Getty causes them to basically remove the primer due to their painting process. Here is SoCal with all the environmental laws, the paint process is limited to just two processes. All my shop has to do is lightly wet sand it one more time before paint. That normally happens anyway as the lid will need to be blocked out to fit the car....no two alike!
I'm going to have the mesh painted matte black BTW. I also have the GT3Tek lip installed (not pictured in the avatar photo).
Due to arrive next Tuesday....then off to the body shop for paint install. I also opted for the primer and wire harness. Just a note, ask your body shop if getting it primed by Getty causes them to basically remove the primer due to their painting process. Here is SoCal with all the environmental laws, the paint process is limited to just two processes. All my shop has to do is lightly wet sand it one more time before paint. That normally happens anyway as the lid will need to be blocked out to fit the car....no two alike!
I'm going to have the mesh painted matte black BTW. I also have the GT3Tek lip installed (not pictured in the avatar photo).
#39
Three Wheelin'
#40
it drains into the engine compartment. the 911 engine is designed to get wet. that said, it's not a ton of water that gets in there. I drove around in a pretty heavy rain storm the other day and the engine was bone dry after. (i have a getty duck wing)
#41
Thanks, good to know.
#42
Instructor
If anyone is thinking about getting a Ducktail or any of their products I suggest giving them a call or email first and talking to Mark. Good guy and they can discount the price if negotiated. I ordered mine end of last week and should be receiving it very soon.
#43
Not in MA anymore
Rennlist Member
Rennlist Member
Hope that helps
Matt
#45
Advanced
Thread Starter
Sorry, been away for week and a half and had no internet. Getty tail installed but body guy is still finishing fitting a GT3 style rear bumper I got(Precision Porsche). Problem I found out after getting it from a buddy is I have to update my tail lights to 997.2 because shape a little different than 997.1